Voice Vlan Port Settings; Voice Vlan Oui Settings - D-Link DGS-3000 series Reference Manual

DGS-3000 Series Layer 2 Managed Gigabit Switch Web UI Reference Guide
Log State
Click the Apply button to accept the changes made for each individual section.

Voice VLAN Port Settings

This window is used to show the ports voice VLAN information.
To view the following window, click L2 Features > VLAN > Voice VLAN > Voice VLAN Port Settings, as shown
below:
The fields that can be configured are described below:
Parameter
From Port / To Port
State
Mode
Click the Apply button to accept the changes made.

Voice VLAN OUI Settings

This window is used to configure the user-defined voice traffic's OUI. The OUI is used to identify the voice traffic.
There are a number of pre-defined OUIs. The user can further define the user-defined OUIs if needed. The user-
defined OUI cannot be the same as the pre-defined OUI.
To view the following window, click L2 Features > VLAN > Voice VLAN > Voice VLAN OUI Settings, as shown
below:
reset and stop.
Used to enable or disable sending of issue of voice VLAN log.
Figure 4-17 Voice VLAN Port Settings window
Description
Use the drop-down menu to select a range of port to display.
Use the drop-down menu to enable or disable the state of the port.
Use the drop-down menu to configure the mode of the port.
71