D-Link xStack Reference Manual page 840

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
The event log displays Ethernet OAM event log information. The switch can buffer 1000 event logs.
The event log is different from sys-log as it provides more detailed information than sys-log. Each
OAM event will be recorded in both OAM event log and syslog.
Format
show ethernet_oam ports {<portlist>} [status | configuration | statistics | event_log {index
<value_list>}]
Parameters
<portlist> - (Optional) Specify the range of ports to display.
status - Specifies to display the Ethernet OAM status.
configuration - Specifies to display the Ethernet OAM configuration.
statistics - Specifies to display Ethernet OAM statistics.
event_log - Specifies to display the Ethernet OAM event log information.
index - (Optional) Specify an index range to display.
<value_list> - (Optional) Specify an index range to display.
Restrictions
None.
Example
To display Ethernet OAM statistics information for port 1:
DGS-3620-28SC:admin#show ethernet_oam ports 1 statistics
Command: show ethernet_oam ports 1 statistics
Port 1
------------------------------------------------------------
Information OAMPDU TX
Information OAMPDU RX
Unique Event Notification OAMPDU TX
Unique Event Notification OAMPDU RX
Duplicate Event Notification OAMPDU TX: 0
Duplicate Event Notification OAMPDU RX: 0
Loopback Control OAMPDU TX
Loopback Control OAMPDU RX
Variable Request OAMPDU TX
Variable Request OAMPDU RX
Variable Response OAMPDU TX
Variable Response OAMPDU RX
Organization Specific OAMPDUs TX
Organization Specific OAMPDUs RX
Unsupported OAMPDU TX
Unsupported OAMPDU RX
Frames Lost Due To OAM
DGS-3620-28SC:admin#
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
: 0
835