D-Link xStack Reference Manual page 739

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Format
create md5 key <key_id 1-255> <password 16>
Parameters
key - Specifies that the MD5 key will be created.
<key_id 1-255> - Enter the MD5 key used here. This key must be between 1 and 255.
<password 16> - Enter an alphanumeric string of between 1 and 16, case-sensitive
characters, used to generate the Message Digest which is in turn is used to authenticate
OSPF packets within the OSPF routing domain.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To create an MD5 key table:
DGS-3620-28SC:admin# create md5 key 1 dlink
Command: create md5 key 1 dlink
Success.
DGS-3620-28SC:admin#
62-3 delete md5 key
Description
This command is used to delete an MD5 key table.
Format
delete md5 key <key_id 1-255>
Parameters
key - Specifies that the MD5 key will be removed.
<key_id 1-255> - Enter the MD5 key used here. This key must be between 1 and 255.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To delete an MD5 key table:
734