xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28SC:admin#config port_security log state enable
Command: config port_security log state enable
Success.
DGS-3620-28SC:admin#
80-9
config port_security trap state
Description
This command is used to enable or disable the port security trap.
Format
config port_security trap state [enable | disable]
Parameters
enable - Specifies to enable the port security trap.
disable - Specifies to disable the port security trap.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable the port security trap:
DGS-3620-28SC:admin#config port_security trap state enable
Command: config port_security trap state enable
Success.
DGS-3620-28SC:admin#
940