D-Link xStack Reference Manual page 664

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
53-2 show lacp_port
Description
This command is used to display per-port LACP mode.
Format
show lacp_port {<portlist>}
Parameters
<portlist> - (Optional) Specify a range of ports to be displayed.
Note: If no parameter is specified, the system will display current LACP mode for all
ports.
Restrictions
None.
Example
To display the current LACP mode for ports 1 to 3 on the switch:
DGS-3620-28SC:admin#show lacp_port 1:1-1:3
Command: show lacp_port 1:1-1:3
Port Activity
----- --------
1:1 Passive
1:2 Passive
1:3 Passive
DGS-3620-28SC:admin#
LACP Timeout
-----------
Short
Short
Short
659