D-Link xStack Reference Manual page 1154

Dgs-3620 series layer 3 managed stackable gigabit switch

Hide thumbs Also See for xStack:

Table of Contents

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide

Restrictions

To display the URPF settings of all the ports:

DGS-3620-28SC:admin#show ip urpf

Command: show ip urpf

URPF Global State

------ --------- -------------------

DGS-3620-28SC:admin#

109-5 delete ip urpf ports

This command is used to remove URPF checking from one or more ports. After URPF checking

was removed from one port, its mode and default route checking option will be restored to the

default value.

delete ip urpf ports [<portlist> | all]

ports - Specifies the list of ports that will be used for this configuration.

<portlist> - Enter the list of ports that will be used for this configuration.

all - Specifies that all the ports will be used for this configuration.

Restrictions

Only Administrator, Operator and Power-User level users can issue this command.

Default Route Check

------ --------- -------------------

Default Route Check

Chapters

Table of Contents

Xstack dgs-3620-28sc