D-Link xStack Reference Manual page 627

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
10
Command: config address_binding dhcp_snoop max_entry ports 1-3 limit 10
Success.
DGS-3620-28SC:admin#
50-19 config address_binding recover_learning ports
Description
This command is used to recover port learning.
Format
config address_binding recover_learning ports [<portlist> | all]
Parameters
<portlist> - Enter the list of ports to recover learning.
all - Specifies to recover learning for all ports.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure ports 1 to 3 to recover learning:
DGS-3620-28SC:admin#config address_binding recover_learning ports 1-3
Command: config address_binding recover_learning ports 1-3
Success.
DGS-3620-28SC:admin#
50-20 enable address_binding nd_snoop
Description
This command is used to enable ND snooping on the Switch.
Format
enable address_binding nd_snoop
Parameters
None.
622