D-Link xStack Reference Manual page 931

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28SC:admin#
To show the whole IPv6 multicast routing table of (S, G, rpt) generated on the switch:
DGS-3620-28SC:admin# show pim6 mroute s_g rpt
Command: show pim6 mroute s_g rpt
(S, G, rpt) Entry Table
------------------------
Group : FF13::100
Source : 2001::1111
RP Address : 3FFE:10:10::153
Group : FF13::100
Source : 2001::2222
RP Address : 3FFE:10:10::153
Group : FF13::200
Source : 2001::1111
RP Address : 3FFE:10:10::153
Group : FF13::300
Source : 2001::1111
RP Address : 3FFE:10:10::153
Total Entries: 4
DGS-3620-28SC:admin#
Check the detailed information for a specific multicasting routing entry by specifying the options in
the command. To show the detailed information of a multicast route entry (S, G, rpt), specify the
group address and the source address.
DGS-3620-28SC:admin# show pim6 mroute s_g rpt group FF13::100 source 2001::1111
Command: show pim6 mroute s_g rpt group FF13::100 source 2001::1111
Group Address
Source Address
Uptime
Upstream Prune State
Upstream Override Timer
DGS-3620-28SC:admin#
To show the detailed information on a downstream interface of the multicast routing entry (S, G,
rpt), specify the group address, source address and interface name.
DGS-3620-28SC:admin# show pim6 mroute s_g rpt group FF13::100 source 2001::1111
ipif n20
Command: show pim6 mroute s_g rpt group FF13::100 source 2001::1111 ipif n20
: FF13::100
: 2001::1111
: 150 sec
: RPT not joined
: 0 sec
926