D-Link xStack Reference Manual page 431

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28SC:admin#config filter icmpv6_ra_all_node trap enable
Command: config filter icmpv6_ra_all_node trap enable
Success.
DGS-3620-28SC:admin#
25-15 show filter icmpv6_ra_all_node
Description
This command is used to display the filter ICMPv6 RA all-nodes information.
Format
show filter icmpv6_ra_all_node
Parameters
None.
Restrictions
None.
Example
To display filter ICMPv6 RA all-nodes information:
DGS-3620-28SC:admin#show filter icmpv6_ra_all_node
Command: show filter icmpv6_ra_all_node
Enabled ports:1:1-1:8
Trap State: Enabled
Log State: Enabled
Permit Source Address Table:
Source IP Address
---------------------------------------
2200::5
Total Entries:1
DGS-3620-28SC:admin#
25-16 delete filter icmpv6_ra_all_node permit sip
Description
This command is used to delete a filter ICMPv6 RA all-nodes permit entry.
Port
---------------
1:5
426