xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Command: delete dhcp excluded_address begin_address 10.10.10.1 end_address
10.10.10.10
Success.
DGS-3620-28SC:admin#
24-3
show dhcp excluded_address
Description
This command is used to display the groups of IP addresses which are excluded from being a
legal assigned IP address.
Format
show dhcp excluded_address
Parameters
None.
Restrictions
None.
Example
To display the DHCP server excluded addresses:
DGS-3620-28SC:admin#show dhcp excluded_address
Command: show dhcp excluded_address
Index
Begin Address
-----
-------------
1
192.168.0.1
2
10.10.10.10
Total Entries : 2
DGS-3620-28SC:admin#
24-4
create dhcp pool
Description
This command is used to create a DHCP pool by specifying a name. After creating a DHCP pool,
use other DHCP pool configuration commands to configure parameters for the pool.
Format
create dhcp pool <pool_name 12>
End Address
--------------
192.168.0.100
10.10.10.11
395