D-Link xStack Reference Manual page 1028

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Example
To configure the safeguard engine:
DGS-3620-28SC:admin#config safeguard_engine state enable utilization rising 50
falling 30 trap_log enable
Command: config safeguard_engine state enable utilization rising 50 falling 30
trap_log enable
Success.
DGS-3620-28SC:admin#
90-2 show safeguard_engine
Description
This command is used to display safeguard engine information.
Format
show safeguard_engine
Parameters
None.
Restrictions
None.
Example
To display safeguard engine information:
DGS-3620-28SC:admin#show safeguard_engine
Command: show safeguard_engine
Safeguard Engine State
Safeguard Engine Current Status : Normal Mode
===================================================
CPU Utilization Information:
Rising Threshold
Falling Threshold :
Trap/Log State
Mode
DGS-3620-28SC:admin#
Note: The safeguard engine current status has two modes: exhausted and normal mode.
: Disabled
: 30%
20%
: Disabled
: Fuzzy
1023