D-Link xStack Reference Manual page 764

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To disable MLD snooping on the switch:
DGS-3620-28SC:admin#disable mld_snooping
Command: disable mld_snooping
Success.
DGS-3620-28SC:admin#
65-15 show mld_snooping
Description
This command is used to display the current MLD snooping configuration on the switch.
Format
show mld_snooping {[vlan <vlan_name 32> | vlanid <vlanid_list>]}
Parameters
vlan - (Optional) Specify the name of the VLAN for which to view the MLD snooping
configuration.
<vlan_name 32> - Enter the name of the VLAN. The maximum length is 32 characters.
vlanid - (Optional) Specify the ID of the VLAN for which to view the MLD snooping configuration.
<vlanid_list> - Enter a list of VLAN IDs.
Note: If no parameter is specified, the system will display all current MLD snooping
configurations.
Restrictions
None.
Example
To display MLD snooping:
DGS-3620-28SC:admin#show mld_snooping
Command: show mld_snooping
MLD Snooping Global State : Disabled
759