D-Link xStack Reference Manual page 1262

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Log Message: Enable Admin failed through <Console | Telnet |
Web(SSL)| SSH> from <ipaddr | ipv6address> authenticated by
AAA < local | server <ipaddr | ipv6address>> (Username:
<username>).
Parameters description:
local: enable admin by AAA local method.
server: enable admin by AAA server method.
ipaddr: IP address.
ipv6address: IPv6 address.
username: user name.
Event description: Successful login authenticated by AAA local or
none or server.
Log Message: Successful login through <Console | Telnet |
Web(SSL) | SSH> from < ipaddr | ipv6address > authenticated by
AAA <local | none | server <ipaddr | ipv6address>> (Username:
<username>).
Parameters description:
local: specify AAA local method.
none: specify none method.
server: specify AAA server method.
ipaddr: IP address.
ipv6address: IPv6 address.
username: user name.
Event description: Login failed authenticated by AAA local or server.
Log Message: Login failed through <Console | Telnet | Web(SSL)|
SSH> from <ipaddr | ipv6address> authenticated by AAA <local |
server <ipaddr | ipv6address>> (Username: <username>).
Parameters description:
local: specify AAA local method.
server: specify AAA server method.
ipaddr: IP address.
ipv6address: IPv6 address.
username: user name.
WAC
Event description: When a client host fails to authenticate.
Log Message: WAC unauthenticated user (User Name: <string>,
IP: <ipaddr | ipv6address>, MAC: <macaddr>, Port:
<[unitID:]portNum>)
Parameters description:
string: User name
ipaddr: IP address
ipv6address: IPv6 address
macaddr: MAC address
unitID: The unit ID
portNum : The port number
Event description: This log will be triggered when the number of
authorized users reaches the maximum user limit on the whole
device.
Log Message: WAC enters stop learning state.
Event description: This log will be triggered when the number of
authorized users is below the maximum user limit on whole device
in a time interval (5 min).
Log Message: WAC recovered from stop learning state.
Event description: When a client host authenticated successful.
Log Message: WAC authenticated user (Username: <string>, IP:
<ipaddr | ipv6address>, MAC: <macaddr>, Port: <[unitID:]
portNum>)
Parameters description:
string: User name
ipaddr: IP address
ipv6address: IPv6 address
macaddr: MAC address
unitID: The unit ID
portNum : The port number
Informational
Warning
Warning
Warning
Warning
Informational
1257