D-Link xStack Reference Manual page 470

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
31-2 config name_server delete
Description
This command is used to delete a DNS resolver name server from the Switch.
Format
config name_server delete [<ipaddr> | <ipv6addr>] {primary}
Parameters
<ipaddr> - Enter the DNS Resolver name server IPv4 address used here.
<ipv6addr> - Enter the DNS Resolver name server IPv6 address used here.
primary – (Optional) Specifies that the name server is a primary name server.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To delete DNS Resolver name server 10.10.10.1:
DGS-3620-28SC:admin# config name_server delete 10.10.10.10
Command: config name_server delete 10.10.10.10
Success.
DGS-3620-28SC:admin#
31-3 config name_server timeout
Description
This command is used to configure the timeout value of a DNS Resolver name server.
Format
config name_server timeout <second 1-60>
Parameters
timeout - Specifies the maximum time waiting for a responce from a specified name server.
<second 1-60> - Enter the timeout value used here. This value must be between 1 and 60
seconds.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
465