D-Link xStack Reference Manual page 502

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Restrictions
None.
Example
To display unicast MAC address table:
DGS-3620-28SC:admin#show fdb
Command: show fdb
Unicast MAC Address Aging Time
VID VLAN Name
---- -------------------------------- ----------------- ----- ------- -------
1 default
1 default
Total Entries: 2
DGS-3620-28SC:admin#
37-11 show multicast vlan_filtering_mode
Description
This command is used to display the multicast packet filtering mode for VLANs.
Format
show multicast vlan_filtering_mode {[vlanid <vidlist> | vlan <vlan_name 32>]}
Parameters
vlanid - (Optional) Specify to display the entries by VLAN ID list.
<vidlist> - Enter to display the entries by VLAN ID list.
vlan - (Optional) Specify to display the entries for a specific VLAN.
<vlan_name 32> - The maximum length is 32 characters.
Restrictions
None.
Example
To show multicast filtering mode for ports:
DGS-3620-28SC:admin#show multicast vlan_filtering_mode
Command: show multicast filtering_mode
VLAN ID/VLAN Name
-------------------------------
default
= 300
MAC Address
00-01-02-03-04-00 CPU
00-26-5A-AE-CA-1C 21
Multicast Filter Mode
-----------------------------
forward_unregistered_groups
497
Port Type Status
Self Forward
Dynamic Forward