D-Link xStack Reference Manual page 1274

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Upload/Download agentFirmwareUpgrade
agentCfgOperCompleteTrap
Gratuitous ARP
agentGratuitousARPTrap
BGP bgpEstablishedNotification
bgpBackwardTransNotification
Stacking swUnitInsert
swUnitRemove
swUnitFailure
swUnitTPChange
swUnitRoleChange
detected.
Binding objects:
(1) dot3OamEventLogTimestamp
(2) dot3OamEventLogOui
(3) dot3OamEventLogType
(4)dot3OamEventLogLocation
(5)dot3OamEventLogEventTotal
This trap is sent when the process of
upgrading the firmware via SNMP has
finished.
Binding objects：
(1) swMultiImageVersion
The trap is sent when the configuration is
completely saved, uploaded or
downloaded
Binding objects：
unitID
agentCfgOperate
agentLoginUserName
The trap is sent when IP address
conflicted.
Binding objects：
(1) ipaddr
(2) macaddr
(3) portNumber
(4) agentGratuitousARPInterfaceName
The BGP established event is generated
when the BGP FSM enters the
ESTABLISHED state.
Binding objects:
(1) bgpPeerRemoteAddr
(2) bgpPeerLastError
(3) bgpPeerState
The BGP established event is generated
when the BGP FSM enters the
ESTABLISHED state.
Binding objects:
(1) bgpPeerRemoteAddr
(2) bgpPeerLastError
(3) bgpPeerState
Unit Hot Insert notification.
Binding objects：
(1) swUnitMgmtId.
(2) swUnitMgmtMacAddr.
Unit Hot Remove notification.
Binding objects：
(1) swUnitMgmtId.
(2) swUnitMgmtMacAddr.
Unit Failure notification.
Binding objects：
(1) swUnitMgmtId.
The stacking topology change notification.
Binding objects：
(1) swStackTopologyType
(2) swUnitMgmtId
(3) swUnitMgmtMacAddr
The stacking unit role change notification.
Binding objects：
(1) swStackRoleType
1269
1.3.6.1.4.1.171.12.1.7.2
.0.7
1.3.6.1.4.1.171.12.1.7.2
.0.9
1.3.6.1.4.1.171.12.1.7.2
.0.5
1.3.6.1.2.1.15.0.1
1.3.6.1.2.1.15.0.2
1.3.6.1.4.1.171.12.11.2.
2.1.0.1
1.3.6.1.4.1.171.12.11.2.
2.1.0.2
1.3.6.1.4.1.171.12.11.2.
2.1.0.3
1.3.6.1.4.1.171.12.11.2.
2.1.0.4
1.3.6.1.4.1.171.12.11.2.
2.1.0.5