D-Link xStack Reference Manual page 446

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Format
config dhcpv6 pool manual_binding <pool_name 12> [add [<ipv6addr> | <ipv6networkaddr>]
client_duid <string 28> | delete [<ipv6addr> | <ipv6networkaddr> | all]]
Parameters
<pool_name 12> - Enter the DHCPv6 pool name used here. This name can be up to 12
characters long.
add - Specifies the IPv6 address that will statically be bound to a device.
<ipv6addr> - Enter the IPv6 address used for the static bind here.
<ipv6networkaddr> - Enter the IPv6 network address used for the static bind here.
client_duid - Specifies the DUID of the device that will statically be bound to the IPv6 address
entered in the previous field.
<string 28> - Enter the client DUID used here. This string can be up to 28 characters long.
delete - Specifies to delete the manual binding entry.
<ipv6addr> - Enter the IPv6 address of the manual binding entry to be deleted here.
<ipv6networkaddr> - Enter the IPv6 network address of the manual binding entry to be
deleted here.
all - Specifies that all manual binding entries will be deleted.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To add a manual binding DHCPv6 entry:
DGS-3620-28SC:admin# config dhcpv6 pool manual_binding pool1 add 2000::3
client_duid 00010006124dd5840021918d4d9f
Command: config dhcpv6 pool manual_binding pool1 add 2000::3 client_duid
00010006124dd5840021918d4d9f
success
DGS-3620-28SC:admin#
27-9 config dhcpv6 pool prefix_delegation
Description
This command is used to create a DHCPv6 prefix pool for an interface.
Format
config dhcpv6 pool prefix_delegation <pool_name 12> <ipv6networkaddr> <value 1-128>
<ipif_name 12>
Parameters
<pool_name 12> - Enter the DHCPv6 server pool name here. This name can be up to 12
characters long.
441