D-Link xStack Reference Manual page 801

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
DGS-3620-28SC:admin#
70-7 show trusted_host
Description
This command is used to display the trusted hosts.
Format
show trusted_host
Parameters
None.
Restrictions
None.
Example
To display trusted hosts:
DGS-3620-28SC:admin#show trusted_host
Command: show trusted_host
Management Stations
IP Address
----------------------------------------------------------------------------
10.48.93.100
10.51.17.1
10.50.95.90
Total Entries : 3
DGS-3620-28SC:admin#
70-8 config snmp system_name
Description
This command is used to configure the SNMP system name of the switch.
Format
config snmp system_name <sw_name>
Access Interface
796