D-Link xStack Reference Manual page 552

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
Parameters
all - Specifies all ports to be displayed.
<portlist> - Enter a range of ports to be displayed.
Restrictions
None.
Example
To display the IGMP Access Control status for ports 1-4:
DGS-3620-28SC:admin#show igmp access_authentication ports 1:1-1:4
Command: show igmp access_authentication ports 1:1-1:4
Port State
----- ---------
1:1 Auth_accounting
1:2 Disabled
1:3 Disabled
1:4 Disabled
DGS-3620-28SC:admin#
To display the IGMP Access Control status for all ports:
DGS-3620-28SC:admin#show igmp access_authentication ports all
Command: show igmp access_authentication ports all
Port State
----- ---------
1:1 Auth_accounting
1:2 Disabled
1:3 Disabled
1:4 Disabled
1:5 Disabled
1:6 Disabled
1:7 Disabled
1:8 Disabled
1:9 Disabled
1:10 Disabled
1:11 Disabled
1:12 Disabled
1:13 Disabled
1:14 Disabled
1:15 Disabled
1:16 Disabled
1:17 Disabled
1:18 Disabled
1:19 Disabled
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry
547
a All