D-Link xStack Reference Manual page 539

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
add - Specifies to add the router ports.
delete - Specifies to delete the router ports.
<portlist> - Enter a range of ports to be configured.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To set up port range 1 to 7 to be forbidden router ports of the default VLAN:
DGS-3620-28SC:admin#config router_ports_forbidden default add 1-7
Command: config router_ports_forbidden default add 1-7
Success.
DGS-3620-28SC:admin#
43-5 enable igmp_snooping
Description
This command allows you to enable IGMP snooping on the switch.
Format
enable igmp_snooping
Parameters
None.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To enable IGMP snooping on the switch:
DGS-3620-28SC:admin#enable igmp_snooping
Command: enable igmp_snooping
Success.
DGS-3620-28SC:admin#
534