Installing The New System Board; Mounting The System Board - Fujitsu PRIMERGY TX1310 M1 Upgrade And Maintenance Manual

System board and components

14.4.3 Installing the new system board

14.4.3.1 Mounting the system board

Figure 156: Installing the system board (A)
Ê Hold the new system board by the memory module ejectors and a PCI slot.
V
CAUTION!
– Do not lift or handle the system board by any of its heat sinks!
– Ensure not to damage the EMI springs to comply with applicable
EMC regulations and satisfy cooling requirements and fire
protection measures.
Ê At a slight angle, lower the system board into the chassis.
212 Upgrade and Maintenance Manual
TX1310 M1