Configuring Snmp With Enervista Secure Web Management Software; Example - GE MULTILINK ML2400 Instruction Manual

SNMP

16.3 Configuring SNMP with EnerVista Secure Web Management Software

16.3.1 Example

16–10
Most SNMP v1 capabilities can be set using the EnerVista Secure Web Management
Software. For SNMP v2 and v3 parameters, please refer to Configuring SNMP through the
Command Line Interface on page 16–4.
SNMP variables are used in conjunction with Alert definitions. Alert Definitions are covered
in the next chapter.
To configure SNMP,
Select the Configuration > SNMP menu item.
Use the Edit button to change the SNMP community parameters.
Use the Add buttons to add the management and trap receivers.
MULTILINK ML2400 ETHERNET COMMUNICATIONS SWITCH – INSTRUCTION MANUAL
CHAPTER 16: SNMP