Intermec JANUS 2020 User Manual page 291

Hide thumbs Also See for JANUS 2020:

Table of Contents

JANUS 2020 Hand-Held Computer User's Manual (4MB)

To load the reader's flash memory

1. Decide if you want to save the contents of conventional memory. If so, you

2. Decide if you want to save any files on drives C and E, such as customized

3. Connect the reader to a host computer using an optical link adapter or the

4. Connect a power supply to the communications dock or optical link

6. If the Boot Loader menu does not appear, follow these steps to display it:

7. At the Boot Loader menu, press

9. Insert the Boot Utilities companion disk 1 into a disk drive on the host

must perform the steps in the previous section, "Dumping the Reader's

640K Conventional Memory," now.

startup files, applications, or configuration files. If so, you must copy the

files to a PC card, another reader, or a host computer now. For help, see

"Running Interlnk to Transfer Files" in Chapter 6.

communications dock. Use a null modem RS-232 cable to attach the

accessory to the host computer. This cable is the same one you would use

for Interlnk.

to turn on the reader.

to turn off the reader.

to turn on the reader.

e. Type the password if the reader prompts you to do so. If you fail to

enter the correct password after three attempts, the reader resumes

normal operation.

to execute the Load command.

until you select Load.