Auto-Loader Batch Files; Learning How To Use Auto-Loader - Intermec JANUS 2020 User Manual

Hide thumbs Also See for JANUS 2020:

Table of Contents

JANUS 2020 Hand-Held Computer User's Manual (4MB)

Auto-Loader Batch Files

When you install Auto-Loader onto your host computer, eight batch files are

copied to your host computer. You will use these batch files to change the

contents of drive C on the reader:

• LOAD_USA.BAT or LOADLANG.BAT

• LOADADD.BAT

• LOADIMG.BAT

• LOADNEW.BAT

• LOADXIMG.BAT

• MAKE_USA.BAT or MAKELANG.BAT

• MAKENEW.BAT

Note: The LOADC.BAT file is a master batch file called by the other batch files.

This section covers these topics:

• Moving the Batch Files

• Using an External Power Supply

• How to Use Each Batch File

Learning How to Use Auto-Loader

Follow either of these methods to create an image file, which contains the files

you want on the reader's drive C, and then load it onto the reader:

• Use LOAD_USA, LOADLANG, LOADADD, or LOADNEW to create and

• Use MAKE_USA, MAKELANG, or MAKENEW to create the image file and

load the image file in a single step.

store it on a host computer. Then use LOADIMG or LOADXIMG to load

the image file onto the reader. This two-step method helps you create an

image file to be loaded onto multiple JANUS readers.