Decode Security; Display Backlight Timeout - Intermec JANUS 2020 User Manual

JANUS 2020 Hand-Held Computer User's Manual (4MB)

Decode Security

Purpose:
Default:
Syntax:
Scan:

Display Backlight Timeout

Purpose:
Default:
12-44
Defines the security level to use when decoding bar codes. When you select a
lower decode security level, the reader can decode bar codes with poorer print
quality.
Note: Only use the low parameter as a temporary solution until you can improve the
bar code label print quality.
Moderate
CSdata
Acceptable values for data are:
0 Low
1 Moderate
2 High
One of these bar codes:
Low Decode Security
*$+CS0*
*$+CS0*
Moderate Decode Security
*$+CS1*
*$+CS1*
High Decode Security
*$+CS2*
*$+CS2*
Defines the amount of time the backlight remains on. The backlight timeout
setting significantly affects the reader's battery life. If you set a longer backlight
timeout value, you will use the power in the NiCad battery pack at a faster
rate.
10 seconds
BC
NF