Intermec JANUS 2020 User Manual page 317

JANUS 2020 Hand-Held Computer User's Manual
Using DOS Commands and Applications (continued)
Problem
You see this message when you use
Interlnk/Intersrv to copy files between
the reader and the host computer:
"Not ready writing drive X.
Abort, Retry, Fail?"
10-24
BC BC
NF
(4MB)NF
Solution
Press to Retry and continue copying the files. You may have
a problem copying files if you use the DOS version (utilities
from your PC) of INTERLNK.EXE and INTERSVR.EXE on the
JANUS reader. Intermec modified the INTERLNK.EXE and
INTERSVR.EXE utilities to work with the JANUS reader. The
Intermec version of these utilities is provided on the reader's
Drive D and on the MS-DOS Programs Companion Disk 2. Use
the INTERLNK.EXE and INTERSVR.EXE utilities provided
with your reader to transfer and copy files.
If your files were not copied correctly, try the procedure again
using the INTERLNK.EXE and INTERSVR.EXE utilities
provided with your reader.