Intermec JANUS 2020 User Manual page 132

Option 1 Select Option 1 to enable the Direct
Hardware Wedge and the expanded keyboard. To
select this option, type the following command at
the DOS prompt and press
kwc 1
Or, scan this bar code.
*KWC 1*
*KWC 1*
Note: The following two options disable the expanded keyboard buffer. The expanded
keyboard buffer allows the JANUS device to consistently process bar codes that are
longer than 15 characters. Do not disable the expanded keyboard unless your
application continues to experience compatibility problems.
Option 2 Select Option 2 to enable the Direct
Hardware Wedge and disable the expanded
keyboard. To select this option, type the following
command at the DOS prompt and press
kwc 2
Or, scan this bar code.
*KWC 2*
*KWC 2*
Option 3 Select Option 3 to disable the Virtual
Wedge and the expanded keyboard. To select this (
option, type the following command at the DOS
prompt and press .
kwc 3
Or, scan this bar code.
*KWC 3*
*KWC 3*
BC
NF
Learning About the Software
(
.
(
.
3
C:\ >KWC 1
Keyboard Control
Copyright 1996
Intermec Corp.
Version 1.00
KW Enabled
XKB Enabled
C:\ >
20X0A.006
C:\ >KWC 2
Keyboard Control
Copyright 1996
Intermec Corp.
Version 1.00
KW Enabled
XKB Disabled
C:\ >
20X0A.007
C:\ >KWC 3
Keyboard Control
Copyright 1996
Intermec Corp.
Version 1.00
KW Disabled
XKB Disabled
C:\ >
20X0A.008
3-43