Intermec JANUS 2020 User Manual page 311

JANUS 2020 Hand-Held Computer User's Manual
Running IRL Programs (continued)
Problem
When you try to start the IRL Desktop,
the reader displays an error message
indicating that there is not enough
memory available to run the
Configuration Manager.
The reader is locked up in an IRL
program.
You are having problems trying to
download an IRL program.
You have trouble running an IRL
program with Interlnk.
10-18
BC BC
NF
(4MB)NF
Solution
If the Configuration Manager TSR is unloaded when you start
the IRL Desktop, the reader automatically loads the TSR for
you. If there is not enough conventional memory available for
the Configuration Manager TSR, the reader displays an error
message. Make sure at least 50K of memory is available.
Perform the application break sequence, as described in
"Breaking Out of an Application" in Chapter 9.
Make sure you have performed all these steps:
You configured the communications protocol correctly on
•
the reader and host. For help, see "Configuring the
Communications Protocols" in Chapter 6.
• You activated the communications protocol. For help, see
"Activating One Communications Protocol" in Chapter 6.
• You loaded the protocol handler. For help, see "Loading and
Unloading a Protocol Handler" in Chapter 6.
• You are in the IRL Desktop, at the main menu, with no
commands selected.
You cannot run an IRL program over an Interlnk connection.