Intermec JANUS 2020 User Manual page 101

Hide thumbs Also See for JANUS 2020:

Table of Contents

JANUS 2020 Hand-Held Computer User's Manual (4MB)

The next table shows the tasks you can perform with Auto-Loader, BFT, and

MakeDisk and PutDisk.

You can use these utilities to create an

image file and copy it to drive C:

Auto-Loader Auto-Loader creates an

image file that contains the files you

want placed on the reader's drive C,

and then replaces the reader's old

drive C image file with the new one.

You run Auto-Loader on a host

computer connected to the reader's

Binary File Transfer (BFT) Use BFT in a

900 MHz CrossBar or RF network to

connect a host computer to one or

more devices in order to transfer files

or change the contents of drive C. For

help, see "Downloading Applications

Across the Network" in Chapter 6.

MakeDisk and PutDisk MakeDisk

creates an image file containing the

files you want on the drive, and

PutDisk places the new image on the

JANUS drive. MakeDisk supports the

creation of subdirectories on drives C

and D. For more information, see

"Using MakeDisk and PutDisk to

Change Drives C or D" later in this

AUTOEXEC.BAT

AUTOINST.BAT