Intermec JANUS 2020 User Manual page 155

JANUS 2020 Hand-Held Computer User's Manual (4MB)
4-22
• display the latest error that occurred for a PC card that is installed in the
drive.
To run CARDINFO on the reader, type one of these commands at the DOS
prompt:
Command
cardinfo
cardinfo /off {: slot }
cardinfo /on {: slot }
cardinfo /c
cardinfo /v ¦more
cardinfo /?
Use CARDINFO to manage the reader's power when an I/O card is in the PC
card drive. For example, a modem card draws power even when it is not in
use, so you can conserve the NiCad battery pack by turning off the power to
the PC card drive when you are not using the modem card.
To turn off the power to the PC card drive
• When you are not using the modem card, type this command:
cardinfo /off:1
Or scan this bar code:
*CARDINFO /OOFF/Z*
*CARDINFO /OFF:1*
BC
NF
Description
Displays information about the card inserted in the
PC card drive, including the type of card, size, card
manufacturer, and product name.
Turns off the power to the PC card drive. Use the
slot option to turn off the power to a specific PC card
drive. The JANUS 2020 PC card drive is slot 1.
Turns on the power to the PC card drive. Use the
slot option to turn on the power to a specific PC card
drive. The JANUS 2020 PC card drive is slot 1.
Displays information about the card in the PC card
drive, including the type of card, size, card
manufacturer, product name, and Card Services.
Displays extensive information about the card in the
PC card drive, including the type of card, size,
manufacturer, product name, Card Services, client,
and card configuration.
Use the DOS More switch because the output is
usually more than one screen long.
Displays information about CARDINFO options.