JANUS 2020 Hand-Held Computer User's Manual (4MB)
7. Create the drive image by typing this command at the host computer's
8. Copy the image file from the host computer to the PC card and then insert
9. At the DOS prompt on the JANUS device, type this command to load the
3-32
DOS prompt:
makedisk /s=c:\drived /o=newdrvd.img /d=d
An image file, NEWDRVD.IMG, is created in the working directory of the
host computer's drive C.
Note: Do not create the image file in the directory where the source files reside.
the PC card into the JANUS PC card drive (drive G).
Note: It is recommended that you provide an external power supply for the
JANUS device before you execute PutDisk.
new image file onto drive D.
putdisk /i=g:\newdrvd.img /d=d
BC
NF