Intermec JANUS 2020 User Manual page 109

JANUS 2020 Hand-Held Computer User's Manual (4MB)
4. Copy all the files you want on drive C to the working directory except for
5. The command you type in Step 7 will copy the startup files from
6. Make sure your current directory is the one where you installed the Auto-
7. Type this command:
8. Auto-Loader runs Intersvr on the host computer. When you see the
9. When the update is complete, the reader reboots automatically. Exit
10. Interlnk is still loaded in the reader's memory. If you need the conventional
3-20
the startup files, which must remain in C_FILES\COMMON.
If you want to copy files from drive C, you may need to use Interlnk. For
example, if you have PC card drivers installed on drive C, you should copy
them from the reader to the working directory on the host. You can also
copy files from the companion disks.
C_FILES\COMMON to drive C, overwriting the startup files on your
reader.
If you need to customize the default AUTOEXEC.BAT or CONFIG.SYS,
you should do so now in the C_FILES\COMMON directory.
Loader batch files, or make sure that directory is listed in the path
statement of your host computer's AUTOEXEC.BAT file.
loadnew [ path\ ] filename [ path\filename path\filename ...]
where:
path
is the drive and directory of the file or files to include in
the image file and load to the reader. If you do not
include a path, the current directory is used.
filename
is the name of the file or files to include in the image file
and load to the reader.
You can include multiple path\filename and path\*.* parameters in the
command. The path\*.* parameter loads all the files in a directory. For
example:
loadnew c:\janus\data.txt c:\atadrv\*.*
Interlnk Server Status screen on the host computer, press
warm boot the reader and load Interlnk into memory. Auto-Loader begins
updating drive C.
Intersvr on the host computer by pressing Alt-F4. This message appears:
Drive C: Installation process completed.
memory to run other applications, press
reader. Because Intersvr is no longer running on the host computer, a warm
boot does not cause Interlnk to load itself into the reader's memory.
BC
NF
c:\data\*.*
to
to warm boot the