Decode Security - Intermec Data Collection PC User Manual

5020 Data Collection PC User's Manual
Decode Priority (continued)
3. Scan this bar code:

Decode Security

Purpose: Defines the security level to use when decoding bar codes. When you select a lower
decode security level, the 5020 can decode bar codes with poorer print quality.
Note: Only use the low parameter as a temporary solution until you can improve the bar
code label print quality.
Configuration: Use one of these methods:
In the Configuration or Unit Management application, choose Configure and then Data
Collection. Next, choose Decode Options and then choose Decode Security Level. For
help, see Chapter 3, "Configuring the 5020."
On Cold Boot: Not saved
SNMP OID: 1.3.6.1.4.1.1963.15.3.3.3.1.1.10.1.1
Syntax: CSdata
You only use the two-character command CS for bar code configuration labels.
Acceptable values for data are:
0
1
2
Default: Moderate
8-38
Nugg
MSI
*11*
*11*
Exit Accumulate Mode
*-/*
*-/*
Configuration
Applications SNMP
Yes Yes
Low
Moderate
High
Co d e 39
PDF 417
*12*
*12*
Bar Codes
Yes