Performing The Required Operation On The Machine; Store To Hdd - Konica Minolta Pi3505e User Manual

4

Performing the required operation on the machine

1
Touch [Job List] and then select the [Print] tab.
2
Touch [To Be Printed PC].
3
Use [↑] and [↓] to select the job you want to reprint.
4
Touch [Reprint].
5
Use the 10-key pad to input the number of copies, and then touch
[Enter].
6
The copies are printed.

Store to HDD

After saving a print job from your PC to the hard disk drive, you can select
the job on the control panel and print it.
Important!
The optional Hard Disk Drive Kit (HDD-6) must be installed on the
machine in order to use this function.
4-26
Configuring PCL Printer Driver Properties for Windows
Select the job you want to reprint.
HDD
Printer Controller Pi3505e Pi3505e/PS