Table of Contents
Advertisement
3
7
Select the connection information. In the active connection field, check
to make sure that the Pserver you created is connected.
Enable Netware*:
Frame Type*:
Bindery/NDS:
Print Server Name:
Print Server Password:
Preferred NDS Context
Name:
Preferred NDS Tree
Name:
Print Queue Scan Rate:
Mode*:
3-20
Yes
Auto Detect (Select the frame type in accordance with your
network environment.)
NDS
Name of print server created in step 4
Use this setting only when configuring settings on the NetWare
Server.
Name of context that connects Pserver
Name of tree that Pserver logs in to
1 (Change in accordance with needs.)
Pserver
Printer Controller Pi3505e Pi3505e/PS
Network Settings
Advertisement
Table of Contents
