Table of Contents
Advertisement
11
Symptom
Unable to specify Punch.
Unable to effect Punch.
The hole punch position
is not what is expected.
Unable to specify
Folding.
Unable to print image
properly.
Paper is not fed from the
specified paper source.
11-4
Possible Cause
Hole Punch cannot be specified
together with Booklet, OHP or
Envelope.
Printed pages can at times be fed
out without being punched if the
direction of the paper loaded in the
paper source is not correct.
Orientation setting is not correct.
FN-117 and SK-1 is necessary for
Folding. FN-117 and SK-1 must be
selected on "Device Option".
Folding cannot be specified
together with OHP, Thick or
Envelope.
Memory space available is not
sufficient.
Paper will not be fed from the
specified paper source if that
paper source is loaded with paper
of a different size and direction.
Printer Controller Pi3505e Pi3505e/PS
Troubleshooting
Action
Check the setting for each
item of the printer driver.
Check the setting for
Orientation.
Check the punch position
on "Page Layout" of a
printer driver property
sheet.
Specify FN-117 and SK-1
for "Device Option".
Check the setting for each
item of the printer driver.
Simplify the image to
reduce the volume of data
manipulated.
Load the paper source with
paper of the appropriate
size and in the appropriate
direction.
Advertisement
Table of Contents
