Table of Contents
Advertisement
Network Settings
Configuring NetWare 5.x NDS Print Server Mode settings
Note
In order to use the print server mode, you need load IPX protocol on
to the NetWare server.
1
Log in with Admin privileges.
2
Start up NWadmin.
3
Select the organization or department container that will perform print
services, and then select
the
Tools
4
Enter data for
Name, and
Type Name, and then save the settings.
❍
For information about configuring settings for queue user
privileges, printer alert options, multiple queues, and passwords,
see NetWare documentation.
5
Start up PageScope Light and log in to the Admin mode. On the
Network
the settings described below. For more information, see "Using
PageScope Light" on page 3-23.
6
Load MONITOR.NLM onto the NetWare Server console.
Printer Controller Pi3505e Pi3505e/PS
Print Service Quick Setup (Non-NDPS)
menu.
Print Server
Name,
Volume
Name, specify
tab, select
Common Settings
Printer
Name,
Print Queue
Other/Unknown
for the printer
and then NetWare. Configure
3
on
3-19
Advertisement
Table of Contents
