Konica Minolta Pi3505e User Manual page 180

Printer Driver for Macintosh
(2) Punch
This setting is available only when a Punch Unit is installed on the
machine. It controls the punching of holes in a document.
• Off
• Auto
• Top
• Left
(3) Punch Holes
Specify the number of holes to be punched.
Available
settings:
(4) Folding
This setting is available only when the Build-in Finisher (FN-117)
and the Saddle Kit (SK-1) are installed on the machine.
• Off
• Crease
Printer Controller Pi3505e Pi3505e/PS
No page punching
Pages are punch along the top edge when
landscape orientation is selected, or along the
left edge when portrait orientation is selected.
Pages are punched along the top edge.
Pages are punched along the left edge.
Note
Hole punching is not supported for certain types of paper and
for certain locations on a page. For more information, refer to
the User Manual that comes with the machine.
If you select Long Edge in the manual bypass take-up mode,
the paper may sometimes fail to be punched.
When a PK-6 (2 Holes) is installed: 2
When a PK-6 (2 or 3 Holes) is installed: 2 or 3
When a PK-6 (4 Holes) is installed: 4
Note
The number of punch holes setting is available only when a
Punch Kit is installed.
No page folding
Pages are creased.
8
8-35