Windows NT 4.0................2-14 Operating Environment.............2-14 Installing a Windows NT 4.0 Printer Driver.......2-15 Displaying Printer Driver Settings..........2-18 To display a Properties dialog box from the Printers window...2-19 To display a Properties dialog box from an application menu ...2-19 Printer Controller Pi3505e Pi3505e/PS...
Page 3
Configuring NetWare 6 Print Settings ........3-22 Configuring client print settings..........3-22 Using PageScope Light ............. 3-23 Accessing PageScope Light ............ 3-23 Using PageScope Light ............3-24 Logging in to the Admin mode ..........3-24 Selecting the display language ..........3-26 Printer Controller Pi3505e Pi3505e/PS...
Page 4
Performing the required operation on the machine ....4-26 Store to HDD ................4-26 Configuring print driver settings..........4-27 Performing the required operation on the machine ....4-27 Overlay tab...................4-28 Watermark Dialog Box..............4-29 Watermark Detailed Settings Dialog Box .........4-30 Conflicts Dialog Box ..............4-32 Printer Controller Pi3505e Pi3505e/PS...
Page 5
Operating Environment .............. 8-1 Installing the Printer Driver under Mac OS 8/9 ......8-1 Creating Desktop Printer............8-3 LPR (TCP/IP) Connection ............8-6 USB Connection ................ 8-6 Installing the Printer Driver under Mac OS X ......8-7 Printer Controller Pi3505e Pi3505e/PS...
Page 7
11.1 Unable to Print ................11-1 11.2 Unable to Make Correct Settings / Unable to Print Exactly as Set........... 11-3 12 Appendix 12.1 Function Conbination Matrix............. 12-1 12.2 Limitation between Paper Size and Functions ......12-2 Printer Controller Pi3505e Pi3505e/PS...
FCC rules. For Canada Users Interference-Causing Equipment Standard (ICES-003 Issue 3) This Class A digital apparatus complied with Canadian ICES-003 Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. IC-F03 Printer Controller Pi3505e Pi3505e/PS...
This device must be used with shielded interface cables. The use of non-shielded cables is likely to result in interference with radio communications and is prohibited under CISPR 22 rules and local rules. viii Printer Controller Pi3505e Pi3505e/PS...
Page 10
Welcome Congratulations on your selection of the printer controller (Pi3505e) or the printer controller (Pi3505e/PS). This User Manual explains how to run print cycles on the machine, to which the controller is connected. It also provides information about how to setup the Network Interface Card and operate the Digital Copier in a network environment.
Executing the print command while an illegal combination of machine functions is selected will cause the machine to produce incorrect output, or to print nothing. Always take care to configure settings correctly. Printer Controller Pi3505e Pi3505e/PS...
Enlarges or reduces the image on the original. Prints two pages or four pages of originals on a single sheet of paper. Maximum of 16 pages of originals can be printed on a single sheet of paper. 2 up 4 up Printer Controller Pi3505e Pi3505e/PS...
Page 14
By combining Collate with other finishing capabilities, you can make complete sets of documents for immediate delivery without having to do any further processing. Adds a reference number (Distribution Number) to each document set during printing. Printer Controller Pi3505e Pi3505e/PS...
Page 15
Prints only the cover on a different type of paper (such as colored pa- per). Capable of printing on OHP transparencies. You can also insert inter- leaves blank on the OHP transparencies. Folds copies during finishing. Printer Controller Pi3505e Pi3505e/PS...
Configuration The machine can be configured with the options described below. Note You can use either the Printer Controller (Pi3505e) or the Printer Controller (Pi3505e/PS). The Network Interface Card (NC-4) is required in order to use the Printer Controller (Pi3505e) or Printer Controller (Pi3505e/PS).
Page 17
Before Using the Printer Driver Note The Network Interface Card (NC-4) must be installed in order to use the Network Scan Kit (SU-2) or the Internet Fax & Network Scan Kit (SU-3). Printer Controller Pi3505e Pi3505e/PS...
• Use the LAN cable port when connecting the machine as a network computer. (3) Parallel port Use the Parallel port when connecting the machine directly to a computer. The Parallel Interface Kit must be installed in order to use the parallel port. Printer Controller Pi3505e Pi3505e/PS...
See “Installing a Windows Printer Driver” on page 2-1. Connect the other end of the IEEE1284 cable to the computer’s parallel port. ❍ See the documentation that came with your computer for information about where its parallel port is located. Printer Controller Pi3505e Pi3505e/PS...
❍ The LAN port is located on the back of the machine. Plug one end of the LAN cable into the machine’s LAN port. Plug the other end of the LAN cable into a LAN hub. Printer Controller Pi3505e Pi3505e/PS...
Once it starts printing, the machine will not accept any copy job. With this setting, less time is available for copying, but print jobs are performed more quickly. 1-10 Printer Controller Pi3505e Pi3505e/PS...
The controller comes bundled with the following types of printer drivers. PCL6 printer drivers ❍ Windows 98/Me ❍ Windows NT 4.0 ❍ Windows 2000/XP/Server 2003 PS3 printer driver (only with Pi3505e/PS) ❍ Windows 98/Me ❍ Windows NT 4.0 ❍ Windows 2000/XP ❍ Mac OS 8.6/9.2 ❍...
Page 23
Before Using the Printer Driver 1-12 Printer Controller Pi3505e Pi3505e/PS...
For minimum system requirements and the installation procedure for a Windows 2000/XP/Server 2003 printer driver, see page 2-7. Windows NT 4.0 For minimum system requirements and the installation procedure for Windows NT 4.0 printer drivers, see page 2-15. Printer Controller Pi3505e Pi3505e/PS...
On the menu that appears, point to Settings and then click Printers. On the Printers window that appears, double-click the Add Printer icon. On the Add Printer Wizard screen that appears, click the Next button. Printer Controller Pi3505e Pi3505e/PS...
Page 26
On the dialog box that appears prompting entry of the network path, type in the correct path. On the screen that appears asking you to select the manufacturer and model of your printer, click the Have Disk button. Printer Controller Pi3505e Pi3505e/PS...
Page 27
Next button. This displays a screen that asks if you want to print a test page. Select Yes (recommended) to print a test page. ❍ If you elect not to print a test page, select No. Printer Controller Pi3505e Pi3505e/PS...
Below are the detailed procedures for each approach. Note The following procedures explain only how to display dialog boxes for configuring printer driver options. See the following chapters of this manual for information about how to actually configure settings. Printer Controller Pi3505e Pi3505e/PS...
KONICA MINOLTA printer driver (KONICA MINOLTA Di3510 PCL6, for example) is displayed. ❍ If the name of your KONICA MINOLTA printer driver is not displayed, click M, and then select it from the menu that appears. Click the Properties button.
Perform the steps below to install a Windows 2000/XP/Server 2003 printer driver. Note In order to install a printer driver, you must be logged into with administrator privileges. Before starting to install a printer driver, be sure first to quit all other applications. Printer Controller Pi3505e Pi3505e/PS...
Page 31
Local if your computer is directly connected to the machine. Then click the Next button. Note When installing the printer driver from a computer connected to the machine over a network, contact your network administrator. Printer Controller Pi3505e Pi3505e/PS...
Page 32
USB cable and “LPT1” if the connection is made through the IEEE1284 cable. Then, click the [Next] button. Note For information about connecting to a network, see “Network Settings” on page 3-1. Printer Controller Pi3505e Pi3505e/PS...
Page 33
Yes. Finally, click the Next button. For the remainder of the installation, follow the instructions that appear on your computer monitor. When you reach the final screen, click the Finish button to start driver installation. 2-10 Printer Controller Pi3505e Pi3505e/PS...
Page 34
Installing a Windows Printer Driver Installation is complete when all the files have been copied from the CD-ROM and the applicable icon is added to the Printers window. Printer Controller Pi3505e Pi3505e/PS 2-11...
Below are the detailed procedures for each approach. Note The following procedures explain only how to display dialog boxes for configuring printer driver options. See the following chapters of this manual for information about how to actually configure settings. 2-12 Printer Controller Pi3505e Pi3505e/PS...
KONICA MINOLTA printer driver (KONICA MINOLTA Di3510 PCL6, for example) is displayed. ❍ If the name of your KONICA MINOLTA printer driver is not displayed, click M, and then select it from the menu that appears. ❍...
For minimum system requirements and the installation procedure for Windows 98/Me printer drivers, see page 2-2. Windows 2000/XP/Server 2003 For minimum system requirements and the installation procedure for a Windows 2000/XP/Server 2003 printer driver, see page 2-7. 2-14 Printer Controller Pi3505e Pi3505e/PS...
Printers. On the Printers window that appears, double-click the Add Printer icon. On the Add Printer Wizard screen that appears, click the Next button if the machine is connected directly to your computer. Printer Controller Pi3505e Pi3505e/PS 2-15...
Page 39
On the port selection screen that appears, select the LPT port, and then click the Next button. Note For information about connecting to a network, see “Network Settings” on page 3-1. 2-16 Printer Controller Pi3505e Pi3505e/PS...
Page 40
Yes. Finally, click the Next button. For the remainder of the installation, follow the instructions that appear on your computer monitor. When you reach the final screen, click the Finish button to start driver installation. Printer Controller Pi3505e Pi3505e/PS 2-17...
Below are the detailed procedures for each approach. Note The following procedures explain only how to display dialog boxes for configuring printer driver options. See the following chapters of this manual for information about how to actually configure settings. 2-18 Printer Controller Pi3505e Pi3505e/PS...
KONICA MINOLTA printer driver (KONICA MINOLTA Di3510 PCL6, for example) is displayed. ❍ If the name of your KONICA MINOLTA printer driver is not displayed, click M, and then select it from the menu that appears. Click the Properties button.
Connect the USB cable to the copier and PC with the Power Switch The installation of the printer driver through Plug and Play is automatically started on the PC. Install the USB device driver according as instructed by the “Add New Hardware Wizard”. 2-20 Printer Controller Pi3505e Pi3505e/PS...
Page 44
The installation of the printer driver through Plug and Play is automatically started on the PC. Install the printer driver according as instructed by the “Add New Hardware Wizard”. Note Windows NT 4.0 does not support USB. Printer Controller Pi3505e Pi3505e/PS 2-21...
Click the icon of the printer to be deleted. Press the [Delete] key to delete the driver. When the uninstalling procedure is completed, the printer icon disappears from the Printers window. This completes the uninstalling procedure. 2-22 Printer Controller Pi3505e Pi3505e/PS...
See “LPR Printing” on page 3-6. Windows printing See “Windows Printing” on page 3-10. Windows 2000/XP/Server 2003 LPR printing See “LPR Printing” on page 3-6. Windows printing See “Windows Printing” on page 3-10. IPP printing See “IPP Printing” on page 3-12. Printer Controller Pi3505e Pi3505e/PS...
Network Settings Specifying the IP Address From the Copier’s Touch Panel Setting procedure Press the [Utility] key. Touch [Admin. Management] and input the Administrator code. Touch [Admin. 2]. Touch [Network Set]. Printer Controller Pi3505e Pi3505e/PS...
Page 49
With the keypad in the control panel, type in the IP address, and then touch [Enter]. Touch [Subnet Mask]. With the keypad in the control panel, type in the subnet mask, and then touch [Enter]. Touch [Gateway]. Printer Controller Pi3505e Pi3505e/PS...
When you want to print directly to a network printer from Windows 98/Me without going through the server, install PageScope Network Setup from the PageScope CD (for administrators), and configure the Peer-to-Peer print setup. See “5 Peer-to-Peer Print Setup” in the PageScope Network Setup User Manual for details. Printer Controller Pi3505e Pi3505e/PS...
Microsoft TCP/IP print service. Assign the IP parameters. ❍ See “Specifying the IP Address From the Copier’s Touch Panel” on page 3-2 for more information. Use the procedure below to install the printer. Printer Controller Pi3505e Pi3505e/PS...
Printer Ports dialog box, and then click button of the Properties dialog box to close it. Right-click the printer icon again to display its Properties dialog box, display the General tab, and then print a test page. Printer Controller Pi3505e Pi3505e/PS...
IP address of the Network Card into Printer Name or IP Address box. ❍ If the network you are on uses DNS (Domain Name Services), type in the DNS name instead of the IP address. Printer Controller Pi3505e Pi3505e/PS...
Page 54
The printer can also be used as a network printer by other Windows computers on your network whose Windows 2000/XP/Server 2003 systems are configured the same way as described above. Printer Controller Pi3505e Pi3505e/PS...
Specifies the Printing Service name (up to 13 characters). WorkGroup Name Specifies the work group name (up to 15 characters). * Changes in these settings do not go into effect until you turn the machine off and then back on again. 3-10 Printer Controller Pi3505e Pi3505e/PS...
Local Port: //NetBIOS name/Printing Service name. ❍ The NetBIOS name and Printing Service name you should input here are the names that are shown on the PageScope Light Network tab under Common Settings - Windows. Printer Controller Pi3505e Pi3505e/PS 3-11...
Refer to the applicable Windows documentation for more information. Assign the IP parameters. ❍ See “Specifying the IP Address From the Copier’s Touch Panel” on page 3-2 for more information. Use the procedure below to install the printer. 3-12 Printer Controller Pi3505e Pi3505e/PS...
Click Finish to exit the wizard. Click the icon of the newly added printer to select it, and then click Properties on the File menu. Display the General tab and then print a test page. Printer Controller Pi3505e Pi3505e/PS 3-13...
Page 59
The printer can also be used as a network printer by other Windows computers on your network whose Windows 2000/XP/Server 2003 systems are configured the same way as described above. 3-14 Printer Controller Pi3505e Pi3505e/PS...
Start up PageScope Light and log in to the Admin mode. On the Network tab, select Common Settings and then NetWare. Configure the settings described below. For more information, see “Using PageScope Light” on page 3-23. Load MONITOR.NLM onto the NetWare Server console. Printer Controller Pi3505e Pi3505e/PS 3-15...
Page 61
Name of tree that Pserver logs in to Name: Print Queue Scan Rate: 1 (Change in accordance with needs.) Mode*: Pserver * Changes in these settings do not go into effect until you turn the machine off and then back on again. 3-16 Printer Controller Pi3505e Pi3505e/PS...
Load PSERVER.NLM onto the NetWare Server console. At the NetWare Server console, display the print server screen, and confirm that Pi3505e (the printer you created) is shown for Printer 0 and that it shows Waiting for job. Printer Controller Pi3505e Pi3505e/PS...
Page 63
* Changes in these settings do not go into effect until you turn the machine off and then back on again. Note NetWare 4.x support two operational modes: NDS and bindery emulation. Before trying to use bindery emulation, use the NetWare Server to make sure that bindery emulation is enabled. 3-18 Printer Controller Pi3505e Pi3505e/PS...
Start up PageScope Light and log in to the Admin mode. On the Network tab, select Common Settings and then NetWare. Configure the settings described below. For more information, see “Using PageScope Light” on page 3-23. Load MONITOR.NLM onto the NetWare Server console. Printer Controller Pi3505e Pi3505e/PS 3-19...
Page 65
Server. Preferred NDS Context Name of context that connects Pserver Name: Preferred NDS Tree Name of tree that Pserver logs in to Name: Print Queue Scan Rate: 1 (Change in accordance with needs.) Mode*: Pserver 3-20 Printer Controller Pi3505e Pi3505e/PS...
Input the IP address assigned to the control as the host address and Print for the printer name, and then click Finish. On the printer driver registration screen that appears, select None each OS, and finalize the registration. Printer Controller Pi3505e Pi3505e/PS 3-21...
For the printer port, browse the network and specify the name of the queue (or the name of the NDPS printer) you created. On the printer model list, select the printer driver on the CD-ROM. Follow the instructions provided by the Wizard to complete the procedure. 3-22 Printer Controller Pi3505e Pi3505e/PS...
Click [Tools] in the menu bar, and then click [Internet Options...]. Click the Connections tab. Click the [LAN Settings] button. Click the [Advanced] button in the “Proxy server” group box. Type the IP address of the printer/scanner controller into the “Exceptions” list box. Printer Controller Pi3505e Pi3505e/PS 3-23...
After you log in to PageScope Light in the Admin mode, you can configure and check printer/scanner controller system settings. Type the administrator password into the Admin Password box. Click Log In to log in to the Admin Mode. 3-24 Printer Controller Pi3505e Pi3505e/PS...
Page 70
PageScope Light automatically logs out of the Admin mode if no operation is performed for about 10 minutes. ❍ All operations on the machine’s control panel are disabled while anyone is logged in to the PageScope Light Admin mode. Printer Controller Pi3505e Pi3505e/PS 3-25...
Access to the copier is denied after a total of three incorrect attempts to access Administrator mode from the both the copier’s control panel and PageScope Light. Allowing Administrator mode to be accessed again Turn the copier off, then on again. 3-26 Printer Controller Pi3505e Pi3505e/PS...
• Specify the resolution Quality p. 4-20 • Configure settings for tracking print jobs Job Management p. 4-21 • Lock a print job • Configure settings for using a watermark Overlay p. 4-28 Printer Controller Pi3505e Pi3505e/PS...
Make sure you configure device options correctly. If you don’t, you may not be able to use certain functions or printing errors may occur. The settings you configure here must match the configuration of your machine. Printer Controller Pi3505e Pi3505e/PS...
Page 74
Mailbin Unit. See “Mailbox Setting Dialog Box” on page 4-4 for more information. (2) About... Click this button to display the manufacturer and version number of the PCL printer driver. Printer Controller Pi3505e Pi3505e/PS...
Click this button to apply changes you have made to a mailbin name. (3) Bin list This is a list of the names that are currently assigned to each bin. To rename a mailbin, select its current name in this list. Printer Controller Pi3505e Pi3505e/PS...
Easy Set name box. (2) Page Preview/Machine Preview This area lets you view a preview of your print document, and to view an image of what options are currently installed on your machine. Printer Controller Pi3505e Pi3505e/PS...
Easy Set group. Use it to assign a name to the setup that you want to save. (1) Easy Set Name Input up to 10 characters for the name of the tab setup you are saving. Printer Controller Pi3505e Pi3505e/PS...
Select this option to print a border around the print image. • N-up Style Click this button to display a dialog box for specifying the N-up Style (p. 4-11). This button is available when any setting other than selected in the N-up box. Printer Controller Pi3505e Pi3505e/PS...
Page 79
Prints two pages on each side of the paper so Binding the paper forms a booklet with left binding when folded. • Booklet Right Prints two pages on each side of the paper so Binding the paper forms a booklet with right binding when folded. Printer Controller Pi3505e Pi3505e/PS...
Page 80
Plain, Transparency (OHP), Thick 1, Envelope • Detail of Click this button to display a dialog box for Paper Source configuring settings for cover pages and OHP interleaving. See “Detail of Paper Source Dialog Box” on page 4-12 for more information. Printer Controller Pi3505e Pi3505e/PS...
Page 81
See “Detail of Paper Source Dialog Box” on page 4-12 for more information. Use the Device Options tab (p. 4-2) to specify the finisher type. The current print output destination is shown in green in the Printer Figure. 4-10 Printer Controller Pi3505e Pi3505e/PS...
This dialog box appears when you click the N-up Style button on the Setup tab. Click the style you want to use as graphically indicated on the dialog box. Vert. Vert. Horiz. Horiz. Discending Ascending Ascending Discending Printer Controller Pi3505e Pi3505e/PS 4-11...
Select this check box to print an image on the back cover. The tray that will supply the paper for printing the main body of the document is indicated green in the Printer Figure image. 4-12 Printer Controller Pi3505e Pi3505e/PS...
Page 84
Setup tab and Interleaving Paper Source on this dialog box. You cannot use OHP interleaving and two-sided printing at the same time. The overhead projector transparencies tray is indicated green in the Printer Figure image. Printer Controller Pi3505e Pi3505e/PS 4-13...
If you have the Saddle Kit (SK-1) equipped on the Built-in Finisher (FN-117) , you can also configure the following settings in addition to those described above. • Center Pages are stapled in the center. • Crease You can select Crease for the (3) Fold setting. 4-14 Printer Controller Pi3505e Pi3505e/PS...
Page 86
Specify the number of holes to be punched. Available settings: When a PK-6 (2 Holes) is installed: 2 When a PK-6 (2 or 3 Holes) is installed: 2 or 3 When a PK-6 (4 Holes) is installed: 4 Printer Controller Pi3505e Pi3505e/PS 4-15...
Page 87
The current punch locations are reflected in the graphic icon shown on the dialog box. (3) Folding Select the paper folding setting you want. • Off No page folding • Crease Pages are creased. 4-16 Printer Controller Pi3505e Pi3505e/PS...
Letter, Legal, Executive, A3, A4, A5, A6, JIS B4, JIS B5, JIS B6, Invoice, Ledger, 11 × 14, FLS, Envelope B5, Envelope #10, Envelope C5, Envelope DL, Envelope Monarch, 8K, 16K, ISO B4, ISO B5 Printer Controller Pi3505e Pi3505e/PS 4-17...
Page 89
Select this setting to print each copy of the document separately. If you have “5” specified for Copies, for example, this setting would print the document from the first page to the last page five times. 4-18 Printer Controller Pi3505e Pi3505e/PS...
Click this button to display a dialog box for editing the paper size settings of the custom paper currently selected in the list. (4) Delete Click this button to delete the custom paper currently selected in the list. Printer Controller Pi3505e Pi3505e/PS 4-19...
Configuring PCL Printer Driver Properties for Windows Quality tab Use the settings on this tab to control the quality of the printed output. (1) Resolution This setting can be configured for 600 × 600 dpi printing only. 4-20 Printer Controller Pi3505e Pi3505e/PS...
For 100-account management: Number Type an access number that is set on the machine, in the range of 0 to 999999 (Max. 6 digits). For 1,000-account management: Type an account number, in range of 001 to 999. Printer Controller Pi3505e Pi3505e/PS 4-21...
Page 93
Select “Darker”, “Middle”, or “Lighter” for the Density density of distribution number printing. • Starting Specify the starting distribution number, in the Number range of 001 to 999. The distribution number restarts from 001 after it reaches 999. 4-22 Printer Controller Pi3505e Pi3505e/PS...
Page 94
Available settings: Delete after printing, Store to HDD, Reprint Note Store to HDD can be selected only when the Hard Disk Drive Kit (HDD-6) is installed on the machine. Printer Controller Pi3505e Pi3505e/PS 4-23...
This setting can be used to configure lock job settings from the printer driver. After the print job is sent from the computer, it is put on hold until the password is input on the machine control panel. Type the user password. 4-24 Printer Controller Pi3505e Pi3505e/PS...
After checking the printed results of a job, you can perform a machine control panel operation to print additional copies. Set the number of additional copies. Configuring print driver settings From the [Job Life] list on the [Job Management] tab, select [Reprint]. Send the print job. Printer Controller Pi3505e Pi3505e/PS 4-25...
Important! The optional Hard Disk Drive Kit (HDD-6) must be installed on the machine in order to use this function. Select the job you want to reprint. 4-26 Printer Controller Pi3505e Pi3505e/PS...
Send the print job. Performing the required operation on the machine Touch [Job List] and then select the [Doc.] tab. Touch [HDD]. Select the job you want to print. Touch [Print] to print the job. Printer Controller Pi3505e Pi3505e/PS 4-27...
• Edit Click this button to display a dialog box for Watermark configuring detailed watermark settings, such as format, position, etc. See “Watermark Dialog Box” on page 4-29 for more information. 4-28 Printer Controller Pi3505e Pi3505e/PS...
This is a list of all of the watermark text that is currently configured. To edit a watermark, select it in this list first. Available NONE, CONFIDENTIAL, TOP SECRET, settings COPY, DO NOT COPY, DRAFT, FINAL, PROOF, and text specified by you Printer Controller Pi3505e Pi3505e/PS 4-29...
(2) String Type up to 63 characters for the watermark text. (3) Type Face You can specify any of the typefaces currently installed on your computer’s operating system as the typeface of the watermark text. 4-30 Printer Controller Pi3505e Pi3505e/PS...
Page 102
(72 points = 1 inch) Specify the position from the center. A positive Horizontal value is to the right, while a positive Vertical value is upward. The settings you make will be reflected in the dialog box's preview image. Printer Controller Pi3505e Pi3505e/PS 4-31...
Executing the print command while an illegal combination of machine functions is selected will cause the machine to produce incorrect output, or to print nothing. Always take care to configure settings correctly. 4-32 Printer Controller Pi3505e Pi3505e/PS...
For information about any printer driver or dialog box setting not covered in this manual, click the Help button (question mark) in the upper right hand corner of the window, and then click on the item you want to know about. Printer Controller Pi3505e Pi3505e/PS...
• Portrait Selecting this option orients the print image vertically. • Landscape Selecting this option orients the print image horizontally. • Rotated Selecting this option rotates the print image 90 Landscape degrees. Printer Controller Pi3505e Pi3505e/PS...
Page 107
Duplex Unit (AD-16) and Switchback Unit (SB- 1) are installed on the machine. (6) Advanced button Click this button to display the Advanced Options dialog box for configuring advanced printing options. For more information, see “Advanced Options Dialog Box” on page 5-9. Printer Controller Pi3505e Pi3505e/PS...
Available settings: Plain, Transparency (OHP), Thick, Envelope (2) Advanced button Click this button to display the Advanced Options dialog box, for configuring advanced printing options. For more information, see “Advanced Options Dialog Box” on page 5-9. Printer Controller Pi3505e Pi3505e/PS...
For 100-account management: Number Type an access number that is set on the machine, in the range of 0 to 999999 (Max. 6 digits). For 1,000-account management: Type an account number, in range of 001 to 999. Printer Controller Pi3505e Pi3505e/PS...
Page 110
Select “Darker”, “Middle”, or “Lighter” for the Density density of distribution number printing. • Starting Specify the starting distribution number, in the Number range of 001 to 999. The distribution number restarts from 001 after it reaches 999. Printer Controller Pi3505e Pi3505e/PS...
Page 111
Hard Disk Drive Kit (HDD-6) is installed on the machine. For information about using the Account Code, Lock Job, Reprint, and Store to HDD functions, see “Kind of Job” on page 4-24. Printer Controller Pi3505e Pi3505e/PS...
Note For information about the PostScript options, click the Help button (question mark) in the upper right hand corner of the window, and then click on the item you want to know about. Printer Controller Pi3505e Pi3505e/PS...
Specify the zoom ratio or enlarging or reducing the print image, in the range of 1 to 1000 • TrueType Select a TrueType font option. Font (3) Advanced Printing Features Use this setting to enable and disable advanced printing features. 5-10 Printer Controller Pi3505e Pi3505e/PS...
• Top 2-point Pages are stapled at two points along the top edge. • Center Pages are stapled in the center. Note “Center” is available only when the optional Saddle Kit (SK-1) is installed. Printer Controller Pi3505e Pi3505e/PS 5-11...
Page 115
“Crease” is available only when the optional Saddle Kit (SK-1) is installed. Output Setting Specify the output bin. Available Default, Bin1, Bin2, Bin3, Bin4 settings: Note Bin1-4 is available only when the Mail Bin Kit (MK-1) is installed. 5-12 Printer Controller Pi3505e Pi3505e/PS...
Page 116
Always specify “1” for the number of copies when using OHP interleaving. You cannot specify the same source for both Paper Source Paper/Quality tab and Interleaving Paper Source on this dialog box. You cannot use OHP interleaving and duplex (two-sided) printing at the same time. Printer Controller Pi3505e Pi3505e/PS 5-13...
Page 117
Specify where the watermark should be printed in the document. • Off Watermark is not printed. • 1st Page Only Prints the watermark on the first page only. • All Pages Prints the watermark on all the pages of the document. 5-14 Printer Controller Pi3505e Pi3505e/PS...
Page 118
Watermark Position (Vertical) Specify the vertical position of the watermark as a value from -999 (left) to +999 (right). Specifying a value of 0 positions the watermark in the vertical center. Printer Controller Pi3505e Pi3505e/PS 5-15...
Select inches, millimeters, or points as the custom paper measurement unit. (3) Paper Feed Direction Specify the custom paper feed direction of the print job. (4) Paper Type Specify the paper type for the custom paper. 5-16 Printer Controller Pi3505e Pi3505e/PS...
Executing the print command while an illegal combination of machine functions is selected will cause the machine to produce incorrect output, or to print nothing. Always take care to configure settings correctly. Printer Controller Pi3505e Pi3505e/PS 5-17...
Page 121
Configuring PostScript Printer Driver Properties for Windows 2000 and XP 5-18 Printer Controller Pi3505e Pi3505e/PS...
• Specify page orientation, duplex settings, paper Paper p. 6-11 source, the number of copies, and the number of pages per sheet • Specify resolution and scaling, and configure Graphics Refer to the halftoning settings Windows help. Printer Controller Pi3505e Pi3505e/PS...
Make sure you configure the options on this tab correctly. If you don’t, you may not be able to use certain functions or printing errors may occur. The settings you configure here must match the configuration of your machine. Printer Controller Pi3505e Pi3505e/PS...
Available 0 – 9 settings: (Example) To specify the password “1234”, you would input the following. Password 1: 1 Password 2: 2 Password 3: 3 Password 4: 4 Printer Controller Pi3505e Pi3505e/PS...
Page 125
Pages are stapled in the corner. • Left 2-point Pages are stapled at two points along the left edge. • Top 2-point Pages are stapled at two points along the top edge. • Center Pages are stapled in the center. Printer Controller Pi3505e Pi3505e/PS...
Page 126
Specify the number of holes to be punched. Available When a PK-6 (2 Holes) is installed: 2 settings: When a PK-6 (2 or 3 Holes) is installed: 2 or 3 When a PK-6 (4 Holes) is installed: 4 Printer Controller Pi3505e Pi3505e/PS...
Page 127
Specify whether you want to include a back cover, and specify whether or not the back cover should be printed on or left blank. • OFF No back cover • ON (Blank) Blank back cover • ON (With Back cover with printing Image) Printer Controller Pi3505e Pi3505e/PS...
Prints the distribution number on the first Only page only. • All Pages Prints the distribution number on all the pages of the document. I Distribution Image Density Specify the relative density (darkness) of distribution number printing. Available Middle, Lighter, Darker Settings: Printer Controller Pi3505e Pi3505e/PS...
Page 129
Prints two pages on each side of the paper so Binding the paper forms a booklet with right binding when folded. • Left Binding Prints two pages on each side of the paper so the paper forms a booklet with left binding when folded. Printer Controller Pi3505e Pi3505e/PS...
Page 130
(+) value rotates the characters counter-clockwise. I Watermark Font Shading Specify the relative density of the watermark text, in the range of 5% to 100% (10% steps) Printer Controller Pi3505e Pi3505e/PS...
Page 131
Make sure you select the options correctly. If you don’t, you may not be able to use certain functions or printing errors may occur. The settings you configure here must match the configuration of your machine. 6-10 Printer Controller Pi3505e Pi3505e/PS...
Page 133
Select the paper source for printing. Available paper sizes are limited by the types of paper trays installed on the machine. Available Auto Select Tray, Manual Feed, Tray1, Tray 2, settings: Tray 3, Tray 4, LCC 6-12 Printer Controller Pi3505e Pi3505e/PS...
For information about any printer driver or dialog box setting not covered in this manual, click the Help button (question mark) in the upper right hand corner of the window, and then click on the item you want to know about. Printer Controller Pi3505e Pi3505e/PS...
(4 holes)), MK-1, SK-1, AK-1 To configure installable options, first select the option in the list, click the Change setting for down arrow button, and then select the setting you want from the list that appears. Printer Controller Pi3505e Pi3505e/PS...
Select the paper source for printing. Available paper sizes are limited by the types of paper trays installed on the machine. Available Auto Select Tray, Manual Feed, Tray1, Tray 2, settings: Tray 3, Tray 4, LCC Printer Controller Pi3505e Pi3505e/PS...
330mm), FLS (216 × 330mm), FLS (220 × 330mm) I Job Life Specify whether a print job should be locked, stored to the hard disk, or reprinted after printing is complete. Available Delete after Printing, Lock Job, Store to HDD, settings: Reprint Printer Controller Pi3505e Pi3505e/PS...
Page 138
Enabling the copy tracking function on the machine can cause printing to can make printing impossible unless the access code designated for the machine is correctly configured. Available Off, On settings: Printer Controller Pi3505e Pi3505e/PS...
Page 139
• Top 2 point Pages are stapled at two points along the top edge. • Center Pages are stapled in the center. Note “Center” is available only when the optional Saddle Kit (SK- 1) is installed. Printer Controller Pi3505e Pi3505e/PS...
Page 140
Punch Kit is installed. I Folding Select the paper folding setting you want. • Off No page folding • Crease Pages are creased. Note “Crease” is available only when the optional Saddle Kit (SK- 1) is installed. Printer Controller Pi3505e Pi3505e/PS...
Page 141
• ON (With Back cover with printing Image) I OHP Interleaving OHP interleaving function inserts sheets of paper (interleaving sheets) between the sheets of film when you are printing on overhead projector transparencies. Available Off, On settings: Printer Controller Pi3505e Pi3505e/PS...
Page 142
Specify the starting distribution number, in the range of 001 to 999. (Example) To specify the starting distribution number “001”, you would input the following. starting distribution number 1: 0 starting distribution number 2: 0 starting distribution number 3: 1 Printer Controller Pi3505e Pi3505e/PS...
Page 143
Drive Kit (HDD-6) is installed on the machine. For U.S.A and Canada users only When using Di2010/Di2010f, the Booklet setting is available only when the Duplex Unit (AD-16) and Switchback Unit (SB-1) are installed on the machine. 7-10 Printer Controller Pi3505e Pi3505e/PS...
Page 144
I Watermark Position (Vertical) Specify the vertical position of the watermark as a value from -999 (left) to +999 (right). Specifying a value of 0 positions the watermark in the vertical center. Printer Controller Pi3505e Pi3505e/PS 7-11...
Page 145
Configuring PostScript Printer Driver Properties for Windows NT 4.0 7-12 Printer Controller Pi3505e Pi3505e/PS...
For information about the procedure for installing the printer driver on a Mac OS X, refer to “Installing the Printer Driver under Mac OS X” on page 8-7. The following procedure shows installation under Mac OS 9.2.2 and LaserWriter 8.7.1. Printer Controller Pi3505e Pi3505e/PS...
Page 147
HosenNDLUSBLib: Required for printing to the USB port. HosenNDLPAPLib: Required for printing with AppleTalk. Double-click Printer Descriptions folder. Drag the appropriate PPD file(e.g. KONICA MINOLTA Dixxxx PS.ppd) from the Printer Controller CD-ROM to the Printer Descriptions folder. Remove the CD-ROM from the CD-ROM drive.
On the Chooser dialog box that appears, click the LaserWriter icon. The printer name set up with the NIC appears in the list under Select a PostScript Printer. Select the printer and click the Create button. Printer Controller Pi3505e Pi3505e/PS...
Page 149
Select button. After the installation is complete, a small printer icon will appear to the left of the printer name in the Select a PostScript Printer list. Click the Setup button. Click the Configure button. Printer Controller Pi3505e Pi3505e/PS...
Page 150
Printer Driver for Macintosh Set the controller operating environment, and then click the button. Click the button. When the Chooser dialog box reappears, close it. You should be able to see a printer icon on the desktop. Printer Controller Pi3505e Pi3505e/PS...
Start Desktop Printer Utility. In the New Desktop Printer window, select Printer (LPR). Then click In the PostScript Printer Description (PPD) File section, click Change and select the PPD for the Pi3505e/PS. In the LPR Printer Selection section, click Change to specify your printer.
Copy Pi3505e_PS_Install.mpkg, Package1.pkg, Package2.pkg to the desktop from the PPD folder on the CD-ROM. Double-click Pi3505e_PS_Install.mpkg, which was copied to the desktop. Pi3505e/PS Installer starts up. Enter the Administrator name and password in the Authenticate dialog box, then click OK. Click the Continue button.
Page 153
Select the partition where the software will be installed, and then click Continue button. Click the Install button. Click the Continue Installation button. Click the Restart button to restart the computer. Printer Controller Pi3505e Pi3505e/PS...
Page 154
Type print for the Queue Name. ❍ Select your printer. In the Printer Model section, select Other..., and select appropriate PPD file (e.g. KONICA MINOLTA Dixxxx PS.ppd) in Library/Printers/ PPDs/Contents/Resources/en.lproj. Then click the button. Printer Controller Pi3505e Pi3505e/PS...
Page 155
Printer Driver for Macintosh On the Printers menu, click Show Info. This displays the Printer Info dialog box. Select Installable Options. Configure the printer settings, and then click the Apply Changes button. Close the PrintCenter dialog box. 8-10 Printer Controller Pi3505e Pi3505e/PS...
Page Attributes property sheet to configure basic settings for printing. (1) Format for Select the name that represents Pi3505e/PS set up with the Network Interface Card. (2) Paper Select the size of the paper you want to use for printing.
Page 157
If the paper size you specify is not loaded in the machine or being fed manually, the machine will display a message prompting you to add paper to Tray1, Tray2, or the manual bypass port, and then it will enter a standby state. 8-12 Printer Controller Pi3505e Pi3505e/PS...
Click this button to display a dialog box for editing the paper size settings of the custom paper currently selected in the list. (4) Delete Click this button to delete the custom paper currently selected in the list. Printer Controller Pi3505e Pi3505e/PS 8-13...
• The initial default setting for this setting is enabled. Smooth graphic images. Smooth Graphics • The initial default setting for this setting is enabled. Adjust bitmapped images to match printer resolution Precision Bitmap Alignment Download as many fonts as required Unlimited Downloadable Fonts 8-14 Printer Controller Pi3505e Pi3505e/PS...
Page 160
Printer Driver for Macintosh The functions of LaserWriter itself are being used. See the documentation provided for LaserWriter. Printer Controller Pi3505e Pi3505e/PS 8-15...
Page Attributes property sheet to configure basic settings for printing. (1) Format for Select the name that represents Pi3505e/PS set up with the Network Interface Card. (2) Paper Size Select the size of the paper you want to use for printing.
Page 162
If the paper size you specify is not loaded in the machine or being fed manually, the machine will display a message prompting you to add paper to Tray1, Tray2, or the manual bypass port, and then it will enter a standby state. Printer Controller Pi3505e Pi3505e/PS 8-17...
Click this button to save the new settings that were specified. (6) Paper Size Type in the width and the height of the custom paper. (7) Printer Margin Specify the margins of the print job. 8-18 Printer Controller Pi3505e Pi3505e/PS...
Note The dialog boxes shown here are based on LaserWriter version 8.7.1. The dialog boxes that appear on your computer screen may show different functions, depending on the particular LaserWriter version you are using. 8-20 Printer Controller Pi3505e Pi3505e/PS...
For most of the options you can select either “Installed” or “Not installed”. Punch Unit option and FLS Size option, however, let you choose from multiple settings, depending on the type of option installed. Printer Controller Pi3505e Pi3505e/PS 8-21...
Page 167
Make sure you select the options correctly. If you don’t, you may not be able to use certain functions or printing errors may occur. The settings you configure here must match the configuration of your machine. 8-22 Printer Controller Pi3505e Pi3505e/PS...
Auto Select, Manual Feed, Tray1, Tray2, Tray3, settings: Tray4, LCC, Plain, Transparency (OHP), Thick, Envelope (5) Destination Use the setting to specify whether the document should be printed to the machine or to a file. Available Printer, File settings: Printer Controller Pi3505e Pi3505e/PS 8-23...
Print the job on a specific date at a specific time Print at Place the job into the print queue without printing it Put Document on Hold The functions of LaserWriter itself are being used. See the documentation provided for LaserWriter. 8-24 Printer Controller Pi3505e Pi3505e/PS...
Matching • PostScript Print with printer color characteristics. Color Matching (2) Intent Specify a matching style. Available Auto selection, Perceptual matching, Relative settings: colorimetric, Saturation matching, Absolute colorimetric (3) Printer Profile Specify a printer profile. Printer Controller Pi3505e Pi3505e/PS 8-25...
Page 171
Printer Driver for Macintosh The functions of LaserWriter itself are being used. See the documentation provided for LaserWriter. 8-26 Printer Controller Pi3505e Pi3505e/PS...
This option is disabled (grayed out) if Print Cover Page set to None. The functions of LaserWriter itself are being used. See the documentation provided for LaserWriter. Printer Controller Pi3505e Pi3505e/PS 8-27...
(3) Border Use this setting to turn borderline printing on and off, and to specify the borderline type. Available None, Single hairline, Single thin line, Double settings: hairline, Double thin line 8-28 Printer Controller Pi3505e Pi3505e/PS...
Page 174
This setting becomes available only when the Print on Both Sides check box is selected. Click the icon that shows the binding edge you want to use. The functions of LaserWriter itself are being used. See the documentation provided for LaserWriter. Printer Controller Pi3505e Pi3505e/PS 8-29...
Type 42 fonts are not generated Never generate Type 42 format Return the Font Downloading items to their recommended Use Defaults settings. The functions of LaserWriter itself are being used. See the documentation provided for LaserWriter. 8-30 Printer Controller Pi3505e Pi3505e/PS...
(3) Job Documentation Folder To do this: Select this check box: Select destination folder for job copies and font logs. Change The functions of LaserWriter itself are being used. See the documentation provided for LaserWriter. Printer Controller Pi3505e Pi3505e/PS 8-31...
Specify the fonts to be saved in the file. Available None, All, All But Standard 13, All But Fonts in settings: PPD file The functions of LaserWriter itself are being used. See the documentation provided for LaserWriter. 8-32 Printer Controller Pi3505e Pi3505e/PS...
Printer Driver for Macintosh Printer Specific Options Choose Resolution This setting can be configured for 600 dpi printing only. Printer Controller Pi3505e Pi3505e/PS 8-33...
The stapling position is determined based on the orientation of the first page of the print job. Remember this when printing a document made up of pages that are oriented differently from each other. 8-34 Printer Controller Pi3505e Pi3505e/PS...
Page 180
Punch Kit is installed. (4) Folding This setting is available only when the Build-in Finisher (FN-117) and the Saddle Kit (SK-1) are installed on the machine. • Off No page folding • Crease Pages are creased. Printer Controller Pi3505e Pi3505e/PS 8-35...
Page 181
When printing on thick paper and other special paper, the output may sometimes fail to be distributed to the output destination you specify. Finisher options can be configured using the Installable Options list (p. 8-21). 8-36 Printer Controller Pi3505e Pi3505e/PS...
Specify the source of the front and back cover paper. Available Tray1, Tray 2, Tray 3, Tray 4, Manual Feed, settings: Note The front cover configured here is different from LaserWriter standard Cover Page function. Printer Controller Pi3505e Pi3505e/PS 8-37...
Page 183
Always specify “1” for the number of copies when using OHP interleaving. You cannot specify the same source for both Paper Source Interleaving Paper Source. You cannot use OHP interleaving and two-sided printing at the same time. Interleaf pages are blank. 8-38 Printer Controller Pi3505e Pi3505e/PS...
The Booklet setting is available only when the Hard Disk Drive Kit (HDD-6) is installed on the machine. For U.S.A and Canada users only When using Di2010/Di2010f, this setting is available only when the Duplex Unit (AD-16) and Switchback Unit (SB-1) are installed on the machine. Printer Controller Pi3505e Pi3505e/PS 8-39...
The following fonts can be used. Arial-BoldItalicMT, Arial-BoldMT, Arial-ItalicMT, ArialMT, Courier, Courier-Bold, Courier-BoldOblique, Courier-Oblique, Helvetica, Helvetica-Bold, Helvetica-BoldOblique, Helvetica-Oblique, Times- Bold, Times-BoldItalic, Times-Italic, Times-Roman (4) Watermark Font Size Select a font size in the range of 8 points to 200 points. 8-40 Printer Controller Pi3505e Pi3505e/PS...
Page 186
(+) value rotates the characters counter-clockwise. (6) Watermark Font Shading Specify the relative density of the watermark text, in the range of 5% to 100% (10% steps). Printer Controller Pi3505e Pi3505e/PS 8-41...
Page 187
Select “Center” if you want to position the watermark in the vertical center of the paper. To position the water mark off center, select “Offset” and then input a value in the range of 1 to 999 to specify the offset amount. Available Center, Offset Settings: 8-42 Printer Controller Pi3505e Pi3505e/PS...
001 to 999. (4) Job Life Specify whether a print job should be locked, stored to the hard disk, or reprinted after printing is complete. Available Delete after Printing, Lock Job, Store to HDD, settings: Reprint Printer Controller Pi3505e Pi3505e/PS 8-43...
Page 189
For 1,000-account management: Type an account number, in range of 001 to 999. Note For information about using the Account Code, Lock Job, Reprint, and Store to HDD functions, see “Kind of Job” on page 4-24. 8-44 Printer Controller Pi3505e Pi3505e/PS...
The dialog box provides details of the conflicting settings. After reading the information on the dialog box, click the Continue button or the Cancel button to close it. Printer Controller Pi3505e Pi3505e/PS 8-45...
Also allows you to print the distribution number. Configure basic settings for OHP Printer Features p. 8-56 interleaving, cover mode, and finishing (staple, punch, and folding) when you need to output multiple complete sets of a document 8-46 Printer Controller Pi3505e Pi3505e/PS...
(3) Pages Specify which pages of the document that you want to print. • All Prints all pages. • From: /To: Prints all pages in the specified range. Printer Controller Pi3505e Pi3505e/PS 8-47...
Click the icon that shows the layout direction you want to use. (4) Border Use this setting to turn borderline printing on and off, and to specify the borderline type. Available None, Single hairline, Single thin line, Double settings: hairline, Double thin line 8-48 Printer Controller Pi3505e Pi3505e/PS...
Click the icon that shows the binding edge you want to use. Note For U.S.A and Canada users only When using Di2010/Di2010f, this setting is available only when the Duplex Unit (AD-16) and Switchback Unit (SB-1) are installed on the machine. Printer Controller Pi3505e Pi3505e/PS 8-49...
Select this check box to save data as a file, without printing it. (2) Format This setting becomes available when the Save as File check box is selected. Use it to specify the file format. Available PostScript , PDF settings: 8-50 Printer Controller Pi3505e Pi3505e/PS...
Use this setting to make settings for handling error information. (1) PostScript Errors Set the method for handling error information. • No special Does not display Error information reporting • Print detailed Prints Error information report Printer Controller Pi3505e Pi3505e/PS 8-51...
Use this setting to select the paper source for printing. Available paper sizes are limited by the types of paper trays installed on the machine. (1) Feed pages from Available Auto Select, Manual Feed, Tray1, Tray 2, Tray settings: 3, Tray 4, LCC 8-52 Printer Controller Pi3505e Pi3505e/PS...
For 100-account management: Number Type an access number that is set on the machine, in the range of 0 to 999999 (Max. 6 digits). For 1,000-account management: Type an account number, in range of 001 to 999. Printer Controller Pi3505e Pi3505e/PS 8-53...
Page 199
Select “Darker”, “Middle”, or “Lighter” for the Density density of distribution number printing. • Starting Specify the starting distribution number, in the Number range of 001 to 999. The distribution number restarts from 001 after it reaches 999. 8-54 Printer Controller Pi3505e Pi3505e/PS...
Page 200
Hard Disk Drive Kit (HDD-6) is installed on the machine. For information about using the Account Code, Lock Job, Reprint, and Store to HDD functions, see “Kind of Job” on page 4-24. Printer Controller Pi3505e Pi3505e/PS 8-55...
(1) Choose Resolution This setting can be configured for 600 dpi printing only. (2) Media Type Specify the type of media that will be used for printing. Available Plain, Transparency (OHP), Thick 1, Envelope settings: 8-56 Printer Controller Pi3505e Pi3505e/PS...
Page 202
Specify the source of the front and back cover paper. Available Tray1, Tray 2, Tray 3, Tray 4, Manual Feed, settings: Note The front cover configured here is different from LaserWriter standard Cover Page function. Printer Controller Pi3505e Pi3505e/PS 8-57...
Page 203
Always specify “1” for the number of copies when using OHP interleaving. You cannot specify the same source for both Paper Source Interleaving Paper Source. You cannot use OHP interleaving and two-sided printing at the same time. Interleaf pages are blank. 8-58 Printer Controller Pi3505e Pi3505e/PS...
Page 204
Pages are stapled at two points along the top edge. • Left 2 points Pages are stapled at two points along the left edge. • Center Pages are stapled in the center. • Corner Pages are stapled in the corner. Printer Controller Pi3505e Pi3505e/PS 8-59...
Page 205
When a PK-6 (2 or 3 Holes) is installed: 2 or 3 When a PK-6 (4 Holes) is installed: 4 Note The number of punch holes setting is available only when a Punch Kit is installed. 8-60 Printer Controller Pi3505e Pi3505e/PS...
Page 206
When printing on thick paper and other special paper, the output may sometimes fail to be distributed to the output destination you specify. Finisher options can be configured using the Installable Options list (p. 8-21). Printer Controller Pi3505e Pi3505e/PS 8-61...
Page 207
Prints all copies of each page as a set. If you have “5” specified for Copies, for example, this setting would print five copies of page one, followed by five copies of page two, etc. 8-62 Printer Controller Pi3505e Pi3505e/PS...
Page 208
Prints two pages on each side of the paper so the paper forms a booklet with right binding when folded. • Left Binding Prints two pages on each side of the paper so the paper forms a booklet with left binding when folded. Printer Controller Pi3505e Pi3505e/PS 8-63...
Page 209
Duplex Unit (AD-16) and Switchback Unit (SB-1) are installed on the machine. (3) Mirror Print Select this check box to print a mirror image of your document. (4) Negative Print Select this check box to print a negative of the image. 8-64 Printer Controller Pi3505e Pi3505e/PS...
Page 210
-90° to +90° (15-degree steps). A negative (-) value rotates the characters clockwise, 0 specifies the text should be parallel to the paper, and a positive (+) value rotates the characters counter-clockwise. Printer Controller Pi3505e Pi3505e/PS 8-65...
Page 211
(3) Watermark Position (Vertical) Specify the vertical position of the watermark as a value from -999 (left) to +999 (right). Specifying a value of 0 positions the watermark in the vertical center. 8-66 Printer Controller Pi3505e Pi3505e/PS...
Page 212
Printer Driver for Macintosh < Summary > Displays a list of the current settings for printitng. Printer Controller Pi3505e Pi3505e/PS 8-67...
Make sure you select the options correctly. If you don’t, you may not be able to use certain functions or printing errors may occur. The settings you configure here must match the configuration of your machine. 8-68 Printer Controller Pi3505e Pi3505e/PS...
PS Utility Using PS Utility PS Utility makes it possible for you to send PDF files directly to the Pi3505e/PS without using the application in which they were created. It also allows you to download PostScript fonts. Note You must install Hard Disk Drive Kit (HDD-6) before you can use PS Utility.
Use a text editor to open the NDLPDF.ini file, and change the printer name in the file to the name shown on the icon of the printer you are using (e.g. Name=KONICA MINOLTA Di3510 PS). ❍ If the copy tracking function is enabled on the machine, input the Account Code (6 digits maximum) into the NDLPDF.ini file (e.g.
Dropping the JilFontList.ps file onto the pdfdirect.exe shortcut (or MacPDFDir/MacDLX alias) causes a font list (including downloaded fonts) to be printed. Deleting Downloaded Fonts Dropping the JilFontDelete.ps file onto the pdfdirect.exe shortcut (or MacPDFDir/MacDLX alias) causes all downloaded fonts to be deleted. Printer Controller Pi3505e Pi3505e/PS...
PDL Set Screen (Available only if the printer controller (Pi3505e/PS) is installed) Test Print Screen ❍ Setting Contents ❍ PCL Demo Page ❍ PCL Font List ❍ PS Font List (Available only if the printer controller (Pi3505e/PS) is installed) Printer Controller Pi3505e Pi3505e/PS 10-1...
Using the Touch Panel to Configure Printer Settings Accessing the Printer Settings Screen Press the [Utility] key. Touch [Printer Settings]. Select the setting function. 10-2 Printer Controller Pi3505e Pi3505e/PS...
Page 220
MFP Set Screen ❍ Hold after Reprint Select whether or not the print data is saved after reprinting is finished. ❍ Reprint Hold Time Specifying the length of time that the reprint data is saved. Printer Controller Pi3505e Pi3505e/PS 10-3...
Page 221
This setting specifies how much time should be allowed to pass before print data is cleared when memory capacity is exceeded during spooling of print data. ❍ PostScript Error Report Select whether or not an error report is printed if an error occurs during PS printing. 10-4 Printer Controller Pi3505e Pi3505e/PS...
Page 222
Using the Touch Panel to Configure Printer Settings Default Set Screen (Basic Setting Screen) ❍ Default Tray Specify the default paper source. ❍ Paper Size Specify the default paper size. Printer Controller Pi3505e Pi3505e/PS 10-5...
Page 223
Using the Touch Panel to Configure Printer Settings ❍ Orientation Specify the default paper orientation. ❍ Print Method Specify the default print method. ❍ Sets Specify the default number of copies. 10-6 Printer Controller Pi3505e Pi3505e/PS...
Page 224
Using the Touch Panel to Configure Printer Settings Default Set Screen (Font Setting Screen) ❍ Font Number Specify the default font number. ❍ Symbol Set Specify the default symbol set. Printer Controller Pi3505e Pi3505e/PS 10-7...
Page 225
Specify the default number of lines per page. ❍ Font Size Use these settings to select either Bit Map Font or Scalable Font, and to specify the default font size. PDL Set Screen Select default PDL (Printer Description Language). 10-8 Printer Controller Pi3505e Pi3505e/PS...
Page 226
Using the Touch Panel to Configure Printer Settings Test Print Screen Touching a button performs the corresponding type of test printing. Printer Controller Pi3505e Pi3505e/PS 10-9...
Set the communications timeout (10 to 300 sec.). The timeout time specified here is applied when print data is received over a parallel or USB connection, as well as when print data is received over a network. 10-10 Printer Controller Pi3505e Pi3505e/PS...
Using the Touch Panel to Configure Printer Settings 10.3 To Delete All Lock Jobs Press the [Utility] key. Touch [Admin. Management] and input the Administrator code. Touch [Admin. 2]. Touch [Job Delete]. Select [Yes] to delete all lock jobs. Printer Controller Pi3505e Pi3505e/PS 10-11...
Allowing a Lock Job to be accessed again On the machine’s contral panel, press the [Utility] key. Touch [Admin. Management]. Input the Administrator code, and then touch [Enter]. Touch [Admin. 2]. Touch [Unlock]. Select [Lock Job], and then touch [Enter]. 10-12 Printer Controller Pi3505e Pi3505e/PS...
Use the copier control panel to check that there are no lock jobs or reprint jobs in the job list and, if there are some, print them. Printer Controller Pi3505e Pi3505e/PS 11-1...
Page 231
If the copy track function is Enter the correct access active, an illegal access number. number might have been entered. If the problem persists after all these procedures have been performed, read the User Manual of the copier. 11-2 Printer Controller Pi3505e Pi3505e/PS...
No stapling can be effected if the Check the document. document contains pages of different sizes. The stapling position is Orientation setting is wrong. Check the stapling position not what is expected. on “Page Layout” of a printer driver property sheet. Printer Controller Pi3505e Pi3505e/PS 11-3...
Page 233
Load the paper source with specified paper source. specified paper source if that paper of the appropriate paper source is loaded with paper size and in the appropriate of a different size and direction. direction. 11-4 Printer Controller Pi3505e Pi3505e/PS...
Appendix 12.2 Limitation between Paper Size and Functions 12-2 Printer Controller Pi3505e Pi3505e/PS...
Page 236
Copyright 2003 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. The information contained in this manual is subject to change without notice to incorporate improvements made on the product or products the manual covers. KONICA MINOLTA BUSINESS TECHNOLOGIES, INC. 2004. 1 Marunouchi Center Building, 1-6-1 Marunouchi, Chiyoda-ku, Tokyo, 100-0005, Japan...