Finishing - Konica Minolta Pi3505e User Manual

8

Finishing

(1)
(2)
(3)
(4)
(5)
(1) Staple
This setting is available only when the Built-in Finisher (FN-117) is
installed on the machine. You can use it to staple the pages of one
printed document at a time.
• Off
• Auto 2 points
• Top 2 points
• Left 2 points
• Center
• Corner
8-34
No page stapling
Pages are stapled at two points along the top
edge when landscape orientation is selected, or
along the left edge when portrait orientation is
selected.
Pages are stapled at two points along the top
edge.
Pages are stapled at two points along the left
edge.
Pages are stapled in the center.
Pages are stapled in the corner.
Note
Stapling may be canceled automatically if a print job is made
up of pages of different sizes.
The stapling position is determined based on the orientation of
the first page of the print job. Remember this when printing a
document made up of pages that are oriented differently from
each other.
Printer Driver for Macintosh
Printer Controller Pi3505e Pi3505e/PS