Table of Contents
Advertisement
5
Configuring PostScript Printer Driver Properties for Windows 2000 and XP
I
OHP Interleaving Paper Source
Select the source tray of the interleaving paper.
Available
settings:
I
Collate
Use this setting when printing multiple copies of the same
document to specify whether printing should be performed by
printing each copy of the document individually, or if all copies of
each page should be printed as a set.
Uncollated
Collated
I
Watermark
Specify where the watermark should be printed in the document.
• Off
• 1st Page Only Prints the watermark on the first page only.
• All Pages
5-14
Tray 1, Tray 2, Tray 3, Tray 4, LCC
Note
You cannot specify the same source for both
the
Paper/Quality
Select this setting when you want all copies of
each page are printed as a set. If you have "5"
specified for Copy Count, for example, this
setting would print five copies of page one,
followed by five copies of page two, etc.
Select this setting to print each copy of the
document separately, if you have "5" specified
for Copy Count, for example, this setting would
print the document from the first page to the last
page five times.
Note
Keep the
Collate
setting of the application you are using turned
off at all times.
Watermark is not printed.
Prints the watermark on all the pages of the
document.
tab and
OHP Interleaving Paper
Printer Controller Pi3505e Pi3505e/PS
Paper Source
on
Source.
Advertisement
Table of Contents
