Configuring Print Driver Settings; Performing The Required Operation On The Machine; Reprint - Konica Minolta Pi3505e User Manual

Configuring PCL Printer Driver Properties for Windows

Configuring print driver settings

1
On the [Job Management] tab, select the [Lock Job] check box.
2
Type the user password into the password box.
3
Send the print job.

Performing the required operation on the machine

1
Touch [Job List] and then select the [Print] tab.
2
Touch [To Be Printed PC].
3
Use [↑] and [↓] to select the job you want to unlock.
4
Touch [Unlock].
5
Use the 10-key pad to input the password, and then touch [Enter].
6
The job prints if the input password is correct.

Reprint

This setting can be used to configure reprint settings from the printer
driver.
After checking the printed results of a job, you can perform a machine
control panel operation to print additional copies.
Configuring print driver settings
1
From the [Job Life] list on the [Job Management] tab, select [Reprint].
2
Send the print job.
Printer Controller Pi3505e Pi3505e/PS
Set the number of
additional copies.
4
4-25