Configuring Postscript Printer Driver Properties For Windows Nt; Using Postscript Printer Driver Properties Tabs - Konica Minolta Pi3505e User Manual

Configuring PostScript Printer Driver Properties for Windows NT 4.0

7 Configuring PostScript Printer Driver
Properties for Windows NT 4.0
This chapter provides detailed explanations of all the machine-specific
printer settings of the PostScript printer driver properties on a computer
running Windows NT 4.0.
7.1

Using PostScript Printer Driver Properties Tabs

The following table explains which tab you should select to perform
specific tasks. For a detailed description of all the settings on a tab, go to
the indicated reference page.
Note
See Chapter 2 for information about how to display printer driver
properties.
Note that the settings that can be configured on the properties dialog
box depends on the printer driver you are using.
When you want to do this:
• Specify what options are installed on the
machine
• Specify page orientation, duplex settings,
paper source, the number of copies, and the
number of pages per sheet
• Configure printer features
Note
For information about any printer driver or dialog box setting not
covered in this manual, click the Help button (question mark) in the
upper right hand corner of the window, and then click on the item you
want to know about.
Printer Controller Pi3505e Pi3505e/PS
Select this tab: Reference page:
Properties — p. 7-2
Device Settings
Page Setup p. 7-3
Advanced p. 7-4
7
7-1