Table of Contents
Advertisement
3
Enable Netware*:
Frame Type*:
Bindery/NDS:
Print Server Name:
Print Server Password:
Preferred NDS Context
Name:
Preferred NDS Tree
Name:
Print Queue Scan Rate:
Mode*:
Printer Number*:
* Changes in these settings do not go into effect until you turn the machine off and then back
on again.
Note
NetWare 4.x support two operational modes: NDS and bindery
emulation.
Before trying to use bindery emulation, use the NetWare Server to
make sure that bindery emulation is enabled.
3-18
Yes
Auto Detect (Select the frame type in accordance with your
network environment.)
NDS
Name of print server created in step 4
Use this setting only when configuring settings on the NetWare
Server.
Name of context loaded by the Pserver
Name of tree loaded by the Pserver
1 (Change in accordance with needs.)
Nprinter/Rprinter
255 Specify the number assigned to the printer (0 to 255) or
255.
Printer Controller Pi3505e Pi3505e/PS
Network Settings
Advertisement
Table of Contents
