Table of Contents
Advertisement
Configuring PostScript Printer Driver Properties for Windows 98 and Me
I Punch
I Punch Holes
Printer Controller Pi3505e Pi3505e/PS
Note
"Center" is available only when the optional Saddle Kit (SK-
1) is installed.
This setting is available only when a Punch Kit (PK-6) is
installed on the machine. It controls the punching of holes in a
document.
• None
No page punching
• Auto
Pages are punch along the top edge when
landscape orientation is selected, or along
the left edge when portrait orientation is
selected.
• Left
Pages are punched along the left edge.
• Top
Pages are punched along the top edge.
Note
Hole punching is not supported for certain types of paper
and for certain locations on a page. For more information,
refer to the User Manual that comes with the machine.
Punch
and
OHP
cannot be selected at the same time.
Note
The number of punch holes setting is available only when a
Punch Kit is installed.
Specify the number of holes to be punched.
Available
When a PK-6 (2 Holes) is installed: 2
settings:
When a PK-6 (2 or 3 Holes) is installed: 2 or 3
When a PK-6 (4 Holes) is installed: 4
Interleaving, and
Punch
6
and
Booklet
6-5
Advertisement
Table of Contents
