Konica Minolta Pi3505e User Manual page 189

8
(5) Lock Job Password
If you select
want to assign to the locked job, in the range of 0000 to 9999 (4
digits).
A locked printing job will be printed after it is unlocked using the
Job List screen on the machine's control panel. Note that the
machine operator must be able to input the password when
unlocking the job.
(6) Account Code
Turn on this item to enable the copy tracking function, which
attaches an account code is to each print job and facilitates
machine management. Note that the copy tracking function must
be enabled on the machine in order to use this function. Enabling
the copy tracking function on the machine can cause printing to
can make printing impossible unless the access code designated
for the machine is correctly configured.
If you Select On for Account Code, type an access number that is
set on the machine, in the range of 0 to 999999 (Max. 6 digits).
For 100-account management:
Type an access number that is set on the machine, in the range of
0 to 999999 (Max. 6 digits).
For 1,000-account management:
Type an account number, in range of 001 to 999.
8-44
Note
Store to HDD can be selected only when the Hard Disk Drive
Kit (HDD-6) is installed on the machine.
Lock Job
Note
For information about using the Account Code, Lock Job,
Reprint, and Store to HDD functions, see "Kind of Job" on
page 4-24.
Printer Driver for Macintosh
for Job Life, type the 4-digit password you
Printer Controller Pi3505e Pi3505e/PS