Konica Minolta Pi3505e User Manual page 89

4
• Fit to Paper
• Scaling
(3) Copies
Type a value or click the arrow buttons to specify the number of
copies you want to print, in the range of 1 to 999.
(4) Collate
Use this setting when printing multiple copies of the same
document to specify whether printing should be performed by
printing each copy of the document individually, or if all copies of
each page should be printed as a set.
• Uncollated
• Collated
4-18
Configuring PCL Printer Driver Properties for Windows
Selecting this check box causes the printed
image to be resized automatically so it matches
the size of the paper being printed on.
Specify the zoom ratio or enlarging or reducing
the print image, in the range of 25% to 400%.
Note
If the paper size you select is not currently loaded in the
machine or Manual Feed, the machine will display a message
prompting you to add paper to Tray1, Tray2, or the manual
feed port, and enter into a standby state.
If you select Fit to Paper
Original Document Size
specified by the application from which you are printing, the
machine will use the paper size specified by the application.
Note
Specify "1" for the Copies
Select this setting when you want all copies of
each page are printed as a set. If you have "5"
specified for Copies, for example, this setting
would print five copies of page one, followed by
five copies of page two, etc.
Select this setting to print each copy of the
document separately. If you have "5" specified
for Copies, for example, this setting would print
the document from the first page to the last page
five times.
while the setting you specified for
does not match the paper size
when OHP interleaving is enabled.
Printer Controller Pi3505e Pi3505e/PS