Table of Contents
Advertisement
7
Configuring PostScript Printer Driver Properties for Windows NT 4.0
I Collate
I Booklet
7-10
Use this setting when printing multiple copies of the same
document to specify whether printing should be performed by
printing each copy of the document individually, or if all copies
of each page should be printed as a set.
• Collated
Select this setting to print each copy of the
document separately. If you have "5"
specified for Copies, for example, this setting
would print the document from the first page
to the last page five times.
• Uncollated
Select this setting when you want all copies of
each page are printed as a set. If you have "5"
specified for Copies, for example, this setting
would print five copies of page one, followed
by five copies of page two, etc.
Note
Keep the
Collate
turned off at all times.
Turn booklet printing on or off, and specify the binding edge.
• Off
Turns off booklet printing.
• Right
Prints two pages on each side of the paper so
Binding
the paper forms a booklet with right binding
when folded.
• Left Binding
Prints two pages on each side of the paper so
the paper forms a booklet with left binding
when folded.
Note
The Booklet setting is available only when the Hard Disk
Drive Kit (HDD-6) is installed on the machine.
For U.S.A and Canada users only
When using Di2010/Di2010f, the
available only when the Duplex Unit (AD-16) and
Switchback Unit (SB-1) are installed on the machine.
setting of the application you are using
Booklet
Printer Controller Pi3505e Pi3505e/PS
setting is
Advertisement
Table of Contents
