Konica Minolta Pi3505e User Manual page 142

Configuring PostScript Printer Driver Properties for Windows NT 4.0
I OHP Interleaving Paper Source
I Distribution Number
I Distribution Image Density
I Distribution Starting Number 1-3
Printer Controller Pi3505e Pi3505e/PS
Note
Always specify "1" for the number of copies when using
OHP interleaving.
You cannot use OHP interleaving and duplex (two-sided)
printing at the same time.
Select the source tray of the interleaving paper.
Available Tray 1, Tray 2, Tray 3, Tray 4, LCC
settings:
Note
You cannot specify the same source for both
Source on the
Paper Source.
Specify where the distribution number should be printed in the
document.
• Off Distribution number is not printed.
• 1st Page Prints the distribution number on the first
Only page only.
• All Pages Prints the distribution number on all the
pages of the document.
Specify the relative density (darkness) of distribution number
printing.
Available Middle, Lighter, Darker
settings:
Specify the starting distribution number, in the range of 001 to
999.
(Example) To specify the starting distribution number "001",
you would input the following.
starting distribution number 1: 0
starting distribution number 2: 0
starting distribution number 3: 1
Paper/Quality tab and
7
Paper
OHP Interleaving
7-9