Table of Contents
Advertisement
Network Settings
Configuring NetWare 4.x NDS Remote Printer Mode settings
1
Log in with Admin privileges.
2
Start up NWadmin.
3
Select the organization or department container that will perform print
services, and then select
menu.
4
Enter data for
Name, and
Type
❍
For information about configuring settings for queue user
privileges, printer alert options, multiple queues, and passwords,
see NetWare documentation.
5
Start up PageScope Light and log in to the Admin mode. On the
Network
the settings described below. For more information, see "Using
PageScope Light" on page 3-23.
6
Load PSERVER.NLM onto the NetWare Server console.
7
At the NetWare Server console, display the print server screen, and
confirm that Pi3505e (the printer you created) is shown for Printer 0
and that it shows Waiting for job.
Printer Controller Pi3505e Pi3505e/PS
Print Server
Volume
Name, specify
Name, and then save the settings.
tab, select
Common Settings
Print Service Quick Setup
Name,
Printer
Name,
Other/Unknown
and then NetWare. Configure
3
on the
Tools
Print Queue
for the printer
3-17
Advertisement
Table of Contents
